NTB15088

Service Bulletin Details

Public Details for: NTB15088

Service information if you confirm there is a need to replace the slide window "information" label on an applied vehicle for any reason (scratches, worn appearance, etc.): - do not replace the slide window latch finisher. The "informat


- 2015 - 2014 -

Classification:
Reference:
BT15-023
Date:
NTB15-088
October 13, 2015
2014-2015 TAXI; SLIDE WINDOW “INFORMATION” LABEL
SERVICE PART AVAILABLE
APPLIED VEHICLES:
2014-2015 Taxi
SERVICE INFORMATION
If you confirm there is a need to replace the slide window “INFORMATION” label on an
Applied Vehicle for any reason (scratches, worn appearance, etc.):

Do not replace the slide window latch finisher. The “INFORMATION” label is available
as a separate service part.

Follow the procedure on page 2 when replacing the label.
“INFORMATION”
label
Figure 1
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/3
Replacing the “INFORMATION” Label
1. Carefully remove all remnants of the original label.

The label should peel off easily. Use a plastic trim tool, if needed.
2. Clean the area of the finisher where the label was applied with mild soap and water.

Confirm the finisher is completely dry and free of residue, oil, and dirt before
proceeding to step 3.
3. Attach the new label.

Position the label in the center of the finisher, just above and aligned with the slide
window latch. See Figure 2 for correct placement.

Make sure no wrinkles form as the label is being applied.
CENTER
Position label
above and aligned
with latch
Latch
Figure 2
2/3
NTB15-088
PARTS INFORMATION
DESCRIPTION
PART NUMBER
QUANTITY
LABEL-SIDE WDW
(Slide Window Information Label)
83896-3LN0A
One per side, as needed
CLAIMS INFORMATION
Submit a Primary Failed Part (PP) line claim using the following claims coding:
DESCRIPTION
RPL INFORMATION LABEL
ONE SIDE
RPL INFORMATION LABEL
BOTH SIDES
PFP
OP CODE
SYM
DIA
FRT
BX5FAA
(1)
(1)
0.2
BX5GAA
(1)
(1)
0.2
83896-3LN0A
(1) Use the Symptom and Diagnostic codes that apply to the repair actually performed.
3/3
NTB15-088


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.