ITB16007A
Service Bulletin Details
Public Details for: ITB16007A
Service information on applied vehicles, the torque specification for the rear final drive assembly rear mounting stud has been revised. New torque specification: 71 n-m, 7.2 kg-m, 52 ft-lbs use the torque specification shown above
Models from 2015
2015 INFINITI QX60 |
Models from 2014
2014 INFINITI QX60 |
Models from 2013
2013 INFINITI JX |
Classification: Reference: PD15-002a Date: ITB16-007a January 28, 2016 JX35, QX60 AND QX60 HYBRID; REVISED REAR FINAL DRIVE ASSEMBLY SPECIFICATION This bulletin has been amended. The APPLIED VEHICLES section has been revised. Please discard previous versions of this bulletin. APPLIED VEHICLES: 2013 JX35 (L50) 2014-2015 QX60 (L50) 2014-2015 QX60 Hybrid (L50) SERVICE INFORMATION On Applied Vehicles, the torque specification for the rear final drive assembly rear mounting stud has been revised. New torque specification: 71 N-m, 7.2 kg-m, 52 ft-lbs Use the torque specification shown above when installing a rear final drive assembly. At a later date and where possible, the applicable Electronic Service Manuals will be updated with the revised specification. 71 (7.2, 52) Figure 1 Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti dealer to determine if this applies to your vehicle. 1/1