NTB16020

Classification:
Reference:
EC15-013
Date:
NTB16-020
February 29, 2016
2013 ROGUE AND 2014-2015 ROGUE SELECT;
CRANK NO START OR START AND NO THROTTLE RESPONSE
WITH ETC DTC STORED
APPLIED VEHICLES:
2013 Rogue (S35)
2014-2015 Rogue Select (S35)
IF YOU CONFIRM
The vehicle is operated as follows:
1. The ambient temperature is below freezing (below 32°F / 0°C).
2. The engine was started and the vehicle driven a short distance.
3. The vehicle was then parked (engine turned OFF), and then allowed to sit for
at least 10 minutes.
THEN, when restarting the engine:

The engine will crank but not start
OR

The engine will start, but the engine will not respond to throttle pedal input.
AND

One or more of the following Electronic Throttle Control (ETC) related DTCs are
found stored in the ECM:
 P2100 (ETC MOT PWR-B1)
 P2101 (ETC FNCTN/CIRC-B1)
 P1726 (ELEC TH CONTROL)
ACTION
Replace the Intelligent Power Distribution Module (IPDM) with the one listed in the PARTS
INFORMATION section of this bulletin.

Refer to the Electronic Service Manual (ESM), section PCS-Power Control
System, for IPDM removal and installation.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2
PARTS INFORMATION
DESCRIPTION
IPDM
PART #
284B6-JG03B
QUANTITY
1
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE SYM DIA FRT
(1)
Replace IPDM
LB88AA
ZL
21
(2)
(1) Reference the Parts Information Table and use the applicable IPDM part number as the
primary failed part.
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated flat rate
time.
2/2
NTB16-020