PIT5125F
Service Bulletin Details
Public Details for: PIT5125F
This preliminary information communication provides information to the technician about vehicles proper operation of the stop and/or turn signals. For vehicles without regular production option code v4d circuit 618 is for the left stop and
- 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 -
Models from 2021
2021 CHEVROLET EXPRESS |
2021 GMC SAVANA |
Models from 2020
2020 CHEVROLET EXPRESS |
2020 GMC SAVANA |
Models from 2019
2019 CHEVROLET EXPRESS |
2019 GMC SAVANA |
Models from 2018
2018 CHEVROLET EXPRESS |
2018 GMC SAVANA |
Models from 2017
2017 CHEVROLET EXPRESS |
2017 GMC SAVANA |
Models from 2016
2016 CHEVROLET EXPRESS |
2016 GMC SAVANA |
Models from 2015
2015 CHEVROLET EXPRESS |
2015 GMC SAVANA |
Models from 2014
2014 CHEVROLET EXPRESS |
2014 GMC SAVANA |
Models from 2013
2013 CHEVROLET EXPRESS CUTAWAY |
2013 GMC SAVANA |
Models from 2012
2012 CHEVROLET EXPRESS |
2012 GMC SAVANA |
Models from 2011
2011 CHEVROLET EXPRESS |
2011 GMC SAVANA |
Models from 2010
2010 CHEVROLET EXPRESS |
2010 GMC SAVANA |
Models from 2009
2009 CHEVROLET EXPRESS |
2009 GMC SAVANA |
Bulletin No.: PIT5125F Published date: 05/26/2021 Preliminary Information PIT5125F Available Stop and Turn Lamp Options/Diagnostic Information Models Brand: Model: Model Years: VIN: from to Engine: Transmissions: Chevrolet Express Cutaway Van 2009 - 2021 All All All All GMC Savana Cutaway Van 2009 - 2021 All All All All Supersession Statement This PI was superseded to update model year. Please discard PIT5125E. The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI. Condition / Concern There has been some confusion regarding the proper operation of the stop and/or turn signals. This could lead to difficultly diagnosing a stop and/or turn signal concern. There are two different ways the BCM can be calibrated for stop and turn signal operation: 1. Without RPO V4D- The stop and turn signals are one lamp (same bulb). Traditionally, there will be one red stop/turn signal lamp per side. 2. With RPO V4D- The stop and turn signals are separate lamps (two different bulbs). Traditionally, there will be one red stop lamp and one amber turn signal per side. Note: RPO V4D is included with (YF2) Ambulance Package, (B3D) School Bus Package or (ANC) Shuttle Bus Package. Recommendations / Instructions 1. Without RPO V4D: See Example Doc ID 2635855, Circuit 618 Yellow (X405 terminal D) is for the left stop and turn signal. Circuit 619 Dk Green (X405 terminal E) is for the right stop and turn signal. 2. With RPO V4D: See Example Doc ID 2635855, Circuit 618 Yellow (X405 terminal D) is for the left turn signal only. Circuit 619 Dk Green (X405 terminal E) is for the right turn signal only. See example doc id 2635856, circuit 1320 light blue (X405 terminal C) is for the stop lamps only. NOTE: If the vehicle is up fitted and the body does not support the way the BCM is calibrated for the stop/turn signal setup, contact Techline Customer Support Center for a new BCM calibration to either remove or add the "V4D" option. Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. © 2021 General Motors. All Rights Reserved.