21-017-21 Rev. A
Service Bulletin Details
Public Details for: 21-017-21 Rev. A
Power transfer unit (ptu) broken input spline - x89 warranty extension this bulletin involves replacing the ptu assembly with an updated part. Customers may experience a malfunction indicator lamp (mil) illumination. Upon further investig
Models from 2017
2017 JEEP CHEROKEE |
Models from 2016
2016 JEEP CHEROKEE |
Models from 2015
2015 JEEP CHEROKEE |
Models from 2014
2014 JEEP CHEROKEE |
NUMBER: GROUP: DATE: 21-017-21 REV. A 21 - Transmission and Transfer Case May 20, 2021 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC. This bulletin supersedes Technical Service Bulletin (TSB) 21-017-21, date of issue May 12, 2021, which should be removed from your files. All revisions are highlighted with **asterisks** and include an updated parts table. SUBJECT: Power Transfer Unit (PTU) Broken Input Spline - X89 Warranty Extension OVERVIEW: This bulletin involves replacing the PTU assembly with an updated part. MODELS: 2014 - 2017 (KL) Jeep Cherokee NOTE: This bulletin applies to vehicles within the following markets/countries: North America, APAC, EMEA and LATAM. NOTE: This bulletin applies to vehicles built on or after April 14, 2014 (MDH 0414XX) and on or before October 10, 2016 (MDH 1010XX) equipped with any 9-SPD 948TE/9HP48 FWD/AWD/4WD Auto Transmission (Sales Codes DFH, DFJ, DF5 or DF6) and with Jeep Active Drive II (Sales Code DK4). SYMPTOM/CONDITION: Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: • P1720-00 - Output Speed Sensor-Wheel Speed Rationality. • P215C-00 - Output Shaft Speed Wheel Speed Correlation. The customer may also describe one or more of the following: • Grinding noise coming from under the vehicle while driving. • Vehicle will not move. DIAGNOSIS: If the customer describes the symptom/condition listed above or if the technician finds the DTC, perform the Repair Procedure. PARTS REQUIRED: Qty. **1 Part No. CXAHX891AA Description Power Transfer Unit Case and Nuts** 21-017-21 REV. A -2- REPAIR PROCEDURE: NOTE: The new PTU assembly comes with the actuator and is already filled with fluid. 1. Replace the PTU assembly. Refer to the detailed service procedures available in DealerCONNECT> Service Library under: 21 - Transmission and Transfer Case / Power Transfer Unit / Removal and Installation. 2. Clear all DTCs that may have been set. 3. Test drive vehicle to verify repair and no grinding noise is present. POLICY: Vehicles included in this Service Bulletin have a warranty extension to an 8 years/150K miles from in-service date warranty period for this repair. See Warranty Bulletins: U.S. D-21-07, Canada SAB 2021-09, International ID-21-11 and Mexico BG-07-21, for details associated with the warranty extension. TIME ALLOWANCE: Labor Operation No: Description Skill Category Amount 21-41-00-92 Power Transfer Unit Assembly - Replace (2 - Skilled) 2 - Automatic Transmission 2.7 Hrs. 2 - Automatic Transmission 4.0 Hrs. Description Skill Category Amount Skid Plate Equipped (2 - Skilled) 2 - Automatic Transmission 0.3 Hrs. NOTE: Includes setting front toe and centering steering wheel where applicable. 21-41-00-93 Power Transfer Unit Assembly - Replace (2.4L Engine Only) (2 - Skilled) NOTE: Includes setting front toe and centering steering wheel where applicable. RELATED LOP: Labor Operation No: 21-41-00-60 FAILURE CODE: ZZ Service Action