SSM 50106

Service Bulletin Details

Public Details for: SSM 50106

Some 2020-2021 explorer/aviator vehicles may exhibit the a/c blowing warm air with dtc P0645 present in the heating ventilation and air conditioning (hvac) module. This may be due to spread terminal/terminal pushout in wire harness 14290 an


- 2021 - 2020 -

SSM 50106 - 2020-2021 Explorer/Aviator - Air Conditioning (A/C) Inoperative
With Diagnostic Trouble Code (DTC) P0645
Some 2020-2021 Explorer/Aviator vehicles may exhibit the A/C blowing warm air with DTC P0645
present in the heating ventilation and air conditioning (HVAC) module. This may be due to spread
terminal/terminal pushout in wire harness 14290 and on the corresponding pins to the body control
module C (BCMC). Before replacement of the BCMC, disconnect all connectors from the BCMC and
check the BCMC pins and wire terminals for damage. Refer to Workshop Manual (WSM), Section
419-10.If spread terminals or terminal pushout is present, repair as necessary. Refer to Wiring
Diagram, Cell 005 for repair procedures. Reconnect all connections to the BCMC as indicated by the
procedure in the Shop manual. Test the function of the A/C to ensure that it is blowing cold air.
APPLICABLE VEHICLES
2020 - 2021 CAR: TV U611N AVIATOR
2020 - 2021 CAR: TW U625N EXPLORER


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.