TSB-21-13-001
Service Bulletin Details
Public Details for: TSB-21-13-001
Technical service bulletin was sent to dealers updating content for the multiport fuel injection (mfi) section of the affected service manual, check at the engine control module ecm).
- 2018 -
Models from 2018
2018 MITSUBISHI OUTLANDER PHEV |
Page 1 of 2 TSB-21-13-001 SUBJECT: UPDATES TO MULTIPORT FUEL INJECTION (MFI) - SERVICE MANUAL REVISION No: TSB-21-13-001 DATE: October 2021 MODEL: 2018 Outlander PHEV CIRCULATE TO: [ ] GENERAL MANAGER [ X ] PARTS MANAGER [ X ] TECHNICIAN [ X ] SERVICE ADVISOR [ X ] SERVICE MANAGER [ X ] WARRANTY PROCESSOR [ ] SALES MANAGER PURPOSE This TSB provides updated content for the Multiport Fuel Injection (MFI) section of the affected Service Manual, Check at the Engine Control Module ECM). AFFECTED VEHICLES D 2018 Outlander PHEV AFFECTED SERVICE MANUAL D 2018 Outlander PHEV Service Manual, Group 13-Fuel Please replace the page in the 2018 Outlander PHEV Service Manual, Group 13-Body −> Fuel Filler Lid section as follows: • 2018 Outlander PHEV Service Manual, Group 13-Body -> Fuel Filler Lid - Attached sheet 17 Copyright 2021, Mitsubishi Motors North America, Inc. The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi Dealer Link, MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com). (5116) Attached sheet 17 Page 2 of 2 TSB-21-13-006 13A-579 MULTIPORT FUEL INJECTION (MFI) MULTIPORT FUEL INJECTION (MFI) DIAGNOSIS TERMINAL TERMINAL NO. CODE INSPECTION ITEM INSPECTION CONDITION (ENGINE CONDITION) 37 Evaporative emission purge solenoid Power supply mode of the electric B+ motor switch: ON PURG NORMAL CONDITION Continuous idling mode Voltage drops 0.6 1.5 V 40 O2RL Heated oxygen sensor (rear) Continuous idling mode 41 ORLE Heated oxygen sensor (rear) offset voltage Power supply mode of the electric 0.4 0.6 V motor switch: ON 43 FFWU Refuel system wake up signal Power supply mode of the electric motor switch: ON (not READY) Right after the B+ fuel filler lid opener switch is pressed. The fuel filler lid 1 V or less opener switch is not pressed. 44 MAP5 Power supply voltage applied to manifold absolute pressure sensor Power supply mode of the electric 4.9 5.1 V motor switch: ON 45 MAP Manifold absolute pressure sensor Power supply mode of the electric motor switch: ON x Engine: warming up x Continuous idling mode At altitude of 0 m (0 ft.) 3.8 4.2 V At altitude of 3.5 3.9 V 600 m (1,969 ft.) At altitude of 1,200 m (3,937 ft.) 3.3 3.7 V At altitude of 1,800 m (5,906 ft.) 3.0 3.4 V Release the accelerator pedal 0.6 1.4 V Engine: revving Voltage varies 49 EVB Evaporative emission leak Power supply mode of the electric 1 V or less detection pump control motor switch: ON59 FFDO Fuel filler lid opener actuator switch 63 VAPR Bypass valve Power supply mode of the electric motor switch: ON (not READY) Fuel filler lid is closed. 1 V or less Fuel filler lid is open. B+ 0.25 - 0.56 V Power supply mode of the electric B+ motor switch: ON