TSB-21-33-001
Service Bulletin Details
Public Details for: TSB-21-33-001
This technical service bulletin was sent to dealers updating content for the front suspension section of the affected service manual.
- 2020 -
Models from 2020
2020 MITSUBISHI ECLIPSE CROSS |
Page 1 of 2 TSB-21-33-001 SUBJECT: No: UPDATES TO FRONT SUSPENSION - SERVICE MANUAL REVISION TSB-21-33-001 DATE: October 2021 MODEL: See Below CIRCULATE TO: [ ] GENERAL MANAGER [ X ] PARTS MANAGER [ X ] TECHNICIAN [ X ] SERVICE ADVISOR [ X ] SERVICE MANAGER [ X ] WARRANTY PROCESSOR [ ] SALES MANAGER PURPOSE This TSB provides updated content for the Front Suspension section of the affected Service Manual. AFFECTED VEHICLES D 2020 Eclipse Cross AFFECTED SERVICE MANUALS D 2020 Eclipse Cross Service Manuals, Group 33-Front Suspension Please replace the pages in the 2020 Eclipse Cross Service Manual, Group 33-Front Suspension section as follows: • 2020 Eclipse Cross Service Manual, Group 33 - Front Suspension -> Lower Arm Removal and Installation- Attached sheet 7 Copyright 2021, Mitsubishi Motors North America, Inc. (5134) The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi Dealer Link, MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com). Page 2 of 2 TSB-21-33-001 Attached sheet 7 33-16 FRONT SUSPENSION LOWER ARM LOWER ARM REMOVAL AND INSTALLATION M1332001602296 CAUTION x The parts indicated by *1 indicates parts which should be temporarily tightened, and then fully tightened with the vehicle standing on the ground at curb weight. x The parts indicated by *2 are the bolts/nuts with friction coefficient stabilizer. Prior to reinstallation, ensure there is no damage, clean dust and soiling from the bearing and thread surfaces, and tighten them to the specified torque. Pre-removal Operation Engine Room Side Cover Removal (Refer to GROUP 51 Under Cover P.51-26). Post-installation Operation x Using Your Fingers, Press the Dust Cover to Check for a Crack or Damage. x Engine Room Side Cover Installation (Refer to GROUP 51 Under Cover P.51-26). x Wheel Alignment Check and Adjustment (Refer to 333-7). x Check the Beam Direction of the Headlight (Refer to 54A Headlight Aiming P.54A-134).Multipurpose grease SAE J310, NLGI No.2 or equivalent 110 ± 11 N•m *2 81 ± 8 ft-lb *2 110 – 11 N•m 81 – 8 ft-lb 71 – 10 N•m 52 – 7 ft-lb 71 ± 10 N•m 52 ± 7 ft-lb 1 *1, 110 – 11 N•m 81 – 8 ft-lb 110 ± 11 N•m *1,2 81 ± 8 ft-lb 2 ACH05320 AB