TSB-21-35A-002

Page 1 of 4
TSB-21-35A-002
SUBJECT:
UPDATES TO REAR DISC BRAKE ASSEMBLY
REMOVAL AND INSTALLATION - SERVICE MANUAL
REVISION
No:
TSB-21-35A-002
DATE:
October 2021
MODEL:
See Below
CIRCULATE TO:
[ ] GENERAL MANAGER
[ X ] PARTS MANAGER
[ X ] TECHNICIAN
[ X ] SERVICE ADVISOR
[ X ] SERVICE MANAGER
[ X ] WARRANTY PROCESSOR
[ ] SALES MANAGER
PURPOSE
This TSB provides updated content for the Basic Brake section of the affected Service
Manuals.
AFFECTED VEHICLES
D
D
D
D
2018 Eclipse Cross
2019 Eclipse Cross
2020 Eclipse Cross
2022 Eclipse Cross
AFFECTED SERVICE MANUALS
D
2018, 2019, 2020 and 2022 Eclipse Cross Service Manuals, Group 35A-Basic Brake
Please replace the pages in the 2018 Eclipse Cross Service Manual, Group 35A-Basic Brake
section as follows:
• 2018 Eclipse Cross Service Manual, Group 35A - Basic Brake -> Rear Disc Brake
Assembly Removal and Installation- Attached sheet 4
Please replace the pages in the 2019 Eclipse Cross Service Manual, Group 35A-Basic Brake
section as follows:
• 2019 Eclipse Cross Service Manual, Group 35A - Basic Brake -> Rear Disc Brake
Assembly Removal and Installation- Attached sheet 4
Please replace the pages in the 2020 Eclipse Cross Service Manual, Group 35A-Basic Brake
section as follows:
• 2020 Eclipse Cross Service Manual, Group 35A - Basic Brake -> Rear Disc Brake
Assembly Removal and Installation- Attached sheet 4
Copyright 2021, Mitsubishi Motors North America, Inc.
(5132)
The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi
Dealer Link, MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com).
Page 2 of 4
TSB-21-35A-002
Please replace the pages in the 2022 Eclipse Cross Service Manual, Group 35A-Basic Brake
section as follows:
• 2022 Eclipse Cross Service Manual, Group 35A - Basic Brake -> Rear Disc Brake
Assembly Removal and Installation- Attached sheet 11
Page 3 of 4
TSB-21-35A-002
Attached sheet 4
35A-42
BASIC BRAKE
REAR DISC BRAKE ASSEMBLY
REAR DISC BRAKE ASSEMBLY
REMOVAL AND INSTALLATION
M1351007001759
Pre-removal Operation
x Parking Brake Rear Cable Connection (Rear Brake
Caliper Side) Removal (Refer to GROUP 36  Parking
Brake Cable P.36-66) .
x Activates the maintenance mode (when rear brake caliper
assembly is disassembled and reassembled) (Refer to
3$ .
x Brake Fluid Draining
Post-installation Operation
x Brake Fluid Supplying and Air Bleeding 
(Refer to P.35A-16).
x Parking Brake Rear Cable Connection (rear brake caliper
side) Installation (Refer to GROUP 36  Parking Brake
Cable P.36-66) .
x Resumes the normal operation mode (when rear brake
caliper assembly is disassembled and reassembled)
(Refer to P.35A-26) .

1
30 ± 5 N·m
22 ± 3 ft-lb
8
13 ± 2 N·m
115 ± 17 in-lb
3N
2
13 ± 2 N·m
115 ± 17 in-lb
4
3N
7
16 ± 3 N·m
12 ± 2 ft-lb
58 ± 7 N·m
43 ± 5 ft-lb
5
16 ± 3 N·m
12 ± 2 ft-lb
16 ± 3 N·m
12 ± 2 ft-lb

10
97 ± 17 in-lb
9
11

11 ± 2 N·m
97 ± 7 in-lb
11 ± 2 N·m
97 ± 7 in-lb

6
13 ± 2 N·m
115 ± 17 in-lb
ACH03411AB
>>A<<
1.
2.
3.
4.
5.
x
Removal steps
Hose clip
Eye bolt
Gasket
Brake hose (rear brake caliper
side)
Rear brake caliper assembly
Brake disc run-out check and
correction (only at installation)
(Refer to P.35A-22).
6.
7.
8.
9.
10.
11.
Removal steps (Continued)
Rear brake disc
Bracket A
Brake tube (trailing arm side)
Clip
Brake hose (body floor side)
Bracket B
Page 4 of 4
TSB-21-35A-002
Attached sheet 11
35A-45
BASIC BRAKE
REAR DISC BRAKE ASSEMBLY
REAR DISC BRAKE ASSEMBLY
REMOVAL AND INSTALLATION
M13510070A0014
Pre-removal Operation
• Parking Brake Rear Cable Connection (Rear Brake
Caliper Side) Removal (Refer to GROUP 36 - Parking
Brake Cable P.36-62) .
• Activates the maintenance mode (when rear brake caliper
assembly is disassembled and reassembled) (Refer to
335A-27) .
• Brake Fluid Draining
Post-installation Operation
• Brake Fluid Supplying and Air Bleeding (Refer to
335A-18).
• Parking Brake Rear Cable Connection (rear brake caliper
side) Installation (Refer to GROUP 36 - Parking Brake
Cable P.36-62) .
• Resumes the normal operation mode (when rear brake
caliper assembly is disassembled and reassembled)
(Refer to P.35A-27) .

13 ± 2 N·m
115 ± 17 in-lb
16 ± 3 N·m
12 ± 2 ft-lb
1
8
3N
2
13 ± 2 N·m
115 ± 17 in-lb
30 ± 5 N·m
22 ± 3 ft-lb
3N
7
16 ± 3 N·m
12 ± 2 ft-lb
4
58 ± 7 N·m
43 ± 5 ft-lb
5
16 ± 3 N·m
12 ± 2 ft-lb
10
9

97 ± 17 in-lb
11

11 ± 2 N·m
97 ± 7 in-lb
11 ± 2 N·m
97 ± 7 in-lb

6
13 ± 2 N·m
115 ± 17 in-lb
ACH03411AB
Removal steps
>>A<<
1.
2.
3.
4.
5.
•
Hose clip
Eye bolt
Gasket
Brake hose (rear brake caliper
side)
Rear brake caliper assembly
Brake disc run-out check and
correction (only at installation)
(Refer to P.35A-24).
Removal steps
6.
7.
8.
9.
10.
11.
Rear brake disc
Bracket A
Brake tube (trailing arm side)
Clip
Brake hose (body floor side)
Bracket B