TSB-21-42A-010

Page 1 of 2
TSB-21-42A-010
SUBJECT:
UPDATES TO BODY - SERVICE MANUAL
REVISION
No:
TSB-21-42A-010
DATE:
October 2021
MODEL:
See Below
CIRCULATE TO:
[ ] GENERAL MANAGER
[ X ] PARTS MANAGER
[ X ] TECHNICIAN
[ X ] SERVICE ADVISOR
[ X ] SERVICE MANAGER
[ X ] WARRANTY PROCESSOR
[ ] SALES MANAGER
PURPOSE
This TSB provides updated content for the Body section of the affected Service Manual,
Loose Panel Removal and Installation.
AFFECTED VEHICLES
2020 Eclipse Cross
D
AFFECTED SERVICE MANUAL
D
2020 Eclipse Cross Service Manual, Group 42A-Body -> Loose Panel
Please replace the page in the applicable Eclipse Cross Service Manual, Group 42A-Body −>
Door section as follows:
• 2020 Eclipse Cross Service Manual, Group 42A-Body -> Loose Panel Removal and
Installation - Attached sheet 9
Copyright 2021, Mitsubishi Motors North America, Inc.
(5135)
The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi
Dealer Link, MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com).
Page 2 of 2
TSB-21-42A-010
Attached sheet 9
42A-173
BODY
LOOSE PANEL
LOOSE PANEL
REMOVAL AND INSTALLATION
M1421003102193
CAUTION
x Disconnect the battery () terminal and wait for 60 seconds or more before starting work. 
Insulate the disconnected () terminal by wrapping a tape.
x Handle the front impact sensor with sufficient caution, and do not drop the sensor or allow 
contact with water, oil, or others. If a dent, crack, deformation and others are discovered, 
replace it with a new one.
x The parts indicated by * indicates parts which should be temporarily tightened, and then fully
tightened with the vehicle standing on the ground at curb weight.
45 ± 7 N·m*
33 ± 5 ft-lb*
24 ± 4 N·m
18 ± 2 ft-lb
24 ± 4 N·m
18 ± 2 ft-lb
7
3
9

45 ± 7 N·m*
33 ± 5 ft-lb*
5
Front axle
crossmember
4
2
7.0 ± 3.0 N·m
106 ± 8 in-lb
6
71 ± 10 N·m
52 ± 7 ft-lb

62 ± 26 in-lb
71 ± 10 N·m
52 ± 7 ft-lb
12 ± 2 N·m
106 ± 17 in-lb
12 ± 2 N·m
106 ± 17 in-lb
8
12 ± 2 N·m
106 ± 17 in-lb
1
12 ± 2 N·m
106 ± 17 in-lb
24 ± 4 N·m
18 ± 2 ft-lb
ACH05231AC