SSM 50296

Service Bulletin Details

Public Details for: SSM 50296

Some 2021 ranger and bronco vehicles built on 15-jun-2021 and through 15-aug-2021 may exhibit an illuminated anti-lock brake system (abs) warning indicator lamp with diagnostic trouble codes (dtc) C003A, C0036, C0037, and/or C0039 stored in


- 2021 -

SSM 50296 - 2021 Ranger/Bronco - Illuminated ABS Warning Indicator Lamp
With DTCs C003A, C0036, C0037, And/Or C0039 - Built On 15-Jun-2021 And
Through 15-Aug-2021
Some 2021 Ranger and Bronco vehicles built on 15-Jun-2021 and through 15-Aug-2021 may exhibit
an illuminated anti-lock brake system (ABS) warning indicator lamp with diagnostic trouble codes
(DTC) C003A, C0036, C0037, and/or C0039 stored in the ABS control module. This may be due to
damage or movement of the ABS tone ring on the rear axle. Remove the ABS sensor and inspect
the rear ABS tone ring for damage or movement from its original position. If movement or damage
has occurred, refer to Workshop Manual (WSM), Section 205-02 to complete the service procedure
for axle shaft replacement. If no movement has occurred, refer to WSM, Section 206-09 for normal
diagnostics.
APPLICABLE VEHICLES
2021 TRUCK: G1 U725N BRONCO
2021 TRUCK: FG P375N RANGER


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.