LI8210P0644042
Service Bulletin Details
Public Details for: LI8210P0644042
Headlamp fog.
- 2022 - 2021 - 2020 - 2019 - 2018 - 2017 - 2016 -
Models from 2022
2022 MERCEDES-BENZ C300 |
Models from 2021
2021 MERCEDES-BENZ C300 |
Models from 2019
2019 MERCEDES-BENZ C300 |
2019 MERCEDES-BENZ C350E |
Models from 2018
2018 MERCEDES-BENZ C250 D |
2018 MERCEDES-BENZ C300 |
2018 MERCEDES BENZ C300 4MATIC |
2018 MERCEDES-BENZ C350E |
Models from 2017
2017 MERCEDES-BENZ C300 |
2017 MERCEDES-BENZ C350 |
2017 MERCEDES-BENZ C350E |
2017 MERCEDES-BENZ C450 |
2017 MERCEDES-BENZ C63S AMG |
Models from 2016
Headlamps fogged Topic number LI82.10-P-064404 Version 2 Design group 82.10 Exterior lights Date 08-26-2016 Validity Model series 205 Halogen Reason for change Part designation changed Reason for block Complaint: Lamp unit fogged or droplets forming. Cause: Due to the vent openings, the lamp unit is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate it. This can result in deposits on the diffuser and lens. Remedy: Check housing cover of lamp unit for natural fogging or dew as per GI82.10-P-009047. . 1. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. 1.1 Remove existing service cover (Figure 1). 1.2 Place desiccant packs in new service covers and bolt down (Figure 02). 1.3 Stick new membrane onto surface provided on service cover. 1.4 Attach service cover with desiccant pack to headlamp. 1.5 Seal vent openings with sealing profile (Figure 3). Important: All openings must be sealed carefully for the pressure compensation membrane to work properly! . 2. If no reduction in the degree of fogging is visible, the lamp unit must be replaced. On the new lamp unit, the service cover with desiccant pack must be installed. . Note: Residual fogging is possible due to the laws of physics and is OK. Fogging does not impair the functionality or the service life of the lamp unit. . Desiccant packs must always be used in both lamp units. Attachments File Description Bild_02.jpg 1) Service cover for desiccant pack 2) Desiccant pack 3) Threaded connection Bild_1.jpg 1) Service cover without membrane Bild_3.jpg Vent openings [1] and [2] on side of headlamp [3] and [4] on bottom of headlamp 08-26-2016 9:00 PM © Copyright Daimler AG BRABENS Page 1/4 Symptoms Overall vehicle / Lighting / Exterior lights / Driving lights / Main headlamps / Fogged Parts Part number ES1 ES2 Designation Quantity Note EPC A 000 826 16 00 Desiccant pack 1 X A 000 826 09 00 Small service cover 1 X A 005 989 12 71 Sealing profile 1 X Attachments File Description Servicedeckel.jpg 1) Service cover 2] Diaphragm 3) Grille 4) Bolt Attachments Bild_02.jpg: 08-26-2016 9:00 PM © Copyright Daimler AG BRABENS Page 2/4 Bild_1.jpg: Bild_3.jpg: 08-26-2016 9:00 PM © Copyright Daimler AG BRABENS Page 3/4 Servicedeckel.jpg: 08-26-2016 9:00 PM © Copyright Daimler AG BRABENS Page 4/4