NTB21-114

Service Bulletin Details

Public Details for: NTB21-114

False activation of rear aeb if you confirm if the customer states that the rear automatic emergency braking (aeb) is activating when there does not appear to be anything behind the vehicle, and/or rear aeb activation occurs while ba


- 2021 -

Models from 2021
2021 NISSAN ROGUE
Classification:
Reference:
DA21-006
Date:
NTB21-114
December 9, 2021
FALSE ACTIVATION OF REAR AEB
APPLIED VEHICLES:
APPLIED SYSTEM:
2021 Rogue (T33)
Automatic Emergency Braking
IF YOU CONFIRM
If the customer states that the Rear Automatic Emergency Braking (AEB) is activating when
there does not appear to be anything behind the vehicle,
AND/OR
Rear AEB activation occurs while backing down a sloped driveway.
ACTION
Perform automatic reconfiguration of the sonar control unit with C-III plus.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it
contains information that is essential to successfully completing this repair.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/8
SERVICE PROCEDURE
IMPORTANT: Before starting, make sure:

ASIST on the CONSULT PC has been synchronized (updated) to the current date.

All CONSULT-III plus (C-III plus) software updates (if any) have been installed.
Sonar Control Unit Configuration
1.
Connect the Vehicle Interface (VI) to the vehicle.
2.
Turn the ignition ON with the engine OFF.
3.
Start CONSULT-III plus (C-III plus) on the CONSULT PC.
 The serial number will display when the VI is recognized.
VI is
recognized
Figure 1
2/8
NTB21-114
4.
Select Re/programming, Configuration.
Figure 2
5.
Use the arrows (if needed) to view and read all precautions.
6.
Check the box confirming the precautions have been read.
7.
Select Next.
Figure 3
3/8
NTB21-114
8.
Select Automatic Selection(VIN).
Example
Figure 4
9.
Make sure VIN or Chassis # matches the vehicle’s VIN.
10.
If the correct VIN is displayed, select Confirm.
XXXXXXXXXXX XXXXXX
ROGUE
2021MY
Figure 5
4/8
NTB21-114
11.
Select Confirm.
XXXXXXXXXXX XXXXXX
Figure 6
12.
Select SONAR.
Figure 7
5/8
NTB21-114
13.
Select Configuration.
Figure 8
14.
Select START.
XXXXXXXXXXX XXXXXX
Figure 9
6/8
NTB21-114
15.
When the configuration reaches 100%, select End.
XXXXXXXXXXX XXXXXX
Figure 10
16.
Close C-III plus and disconnect the VI.
17.
Turn the vehicle OFF.
7/8
NTB21-114
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
(1)
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Reconfigure Sonar Control Unit
(1)
RX0TAA
ZE
32
0.3
Reference the electronic parts catalog and use the ADAS Controller Assembly
(284E7 -*****) as the Primary Failed Part (PFP).
AMENDMENT HISTORY
PUBLISHED DATE
REFERENCE
December 9, 2021
NTB21-114
DESCRIPTION
Original bulletin published
8/8
NTB21-114


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.