NTB21-118

Classification:
Reference:
BT21-027
Date:
NTB21-118
December 17, 2021
RESIDUE ON OUTER SURFACE OF FRONT DOOR GLASS
APPLIED VEHICLES:
APPLIED GRADES:
APPLIED SYSTEMS:
2022 Frontier (D41)
SV with Convenience Package
All PRO-X and PRO-4X
All vehicles with external Intelligent Key door request switches
IF YOU CONFIRM
Adhesive residue is found on the outer surface of front driver (LH) side and/or front
passenger (RH) side window glass.
ACTION
Follow the service procedure in this bulletin to:
1. Remove the door finisher on the affected side.
2. Confirm that the Intelligent Key door request switch wiring harness is contacting the
glass.
3. Reroute the harness as needed.
4. Confirm that the harness is no longer contacting the glass.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it
contains information that is essential to successfully completing this repair.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/3
SERVICE PROCEDURE
1.
Remove the door finisher on the affected side.

2.
Refer to the ESM: BODY INTERIOR > INTERIOR > REMOVAL AND
INSTALLATION > DOOR FINISHER
Inspect the routing of the Intelligent Key request switch wiring harness and confirm if it
is routed as shown in Figure 1.

If routed as shown in Figure 1, proceed to step 3.

If routed as shown in Figure 2, skip to step 5.
Intelligent Key request
switch wiring harness
Outside handle
cable
NG
Correct
Figure 1
Figure 2
3.
Reroute the harness behind the outside handle cable, as shown in Figure 2.
4.
Confirm that neither the harness or cable are no longer contacting the glass.
5.
Reassemble the door finisher.
2/3
NTB21-118
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
Reroute Intelligent Key Wiring Harness
on Left Front (LH) Side Door
(1)
PFP
OP CODE
SYM
DIA
FRT
(1)
RX0VAA
ZE
32
0.2
Reference the electronic parts catalog and use the Front Door Handle Assembly LH
(806B1-*****) as the Primary Failed Part (PFP).
AND/OR On a Separate Line
DESCRIPTION
Reroute Intelligent Key Wiring Harness
on Right Front (RH) Side Door
(1)
PFP
OP CODE
SYM
DIA
FRT
(1)
RX0WAA
ZE
32
0.2
Reference the electronic parts catalog and use the Front Door Handle Assembly RH
(806B0-*****) as the Primary Failed Part (PFP).
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
December 17, 2021
NTB21-118
DESCRIPTION
Original bulletin published
3/3
NTB21-118