TSB210272-121020
Service Bulletin Details
Public Details for: TSB210272-121020
This technical service bulletin describes the process to re-enable fault code 6637 after an engine control module (ecm) calibration code update. This fault code was previously disabled.
- 9999 -
Models from 9999
9999 CUMMINS ISX12 |
12/13/21, 3:08 PM Fault Code 6637 After Engine Control Module (ECM) Calibration Code Update Technical Service Bulletin Technical Service Bulletin: TSB210272 Released Date: 10-Dec-2021 Fault Code 6637 After Engine Control Module (ECM) Calibration Code Update Fault Code 6637 After Engine Control Module (ECM) Calibration Code Update Warranty Statement The information in this document has no effect on present warranty coverage or repair practices, nor does it authorize TRP or Campaign actions. Information Only - OEM Related Matter Not Covered By Cummins® - Contact Appropriate OEM Dealer or OEM Representative For Additional Information Contents Product Affected ISX12N CM2380 X120B Issue Summary Fault Code 6637 was disabled from logging in previous engine control module (ECM) calibration codes and can now log if there is an issue with the datalink variable speed fan. Symptom: Fault Code 6637 - Estimated Engine Parasitic Losses - Percent Torque - Data Erratic, Intermittent, or Incorrect Root Cause: Fault Code 6637 was previously disabled Verification Verify Fault Code 6637 is active when engine is running. Verify the installed ECM calibration code revision level is released on or after 18 November 2021. Resolution See equipment manufacturer service information for datalink variable speed fan related troubleshooting. https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2021/tsb210272.html 1/2 12/13/21, 3:08 PM Fault Code 6637 After Engine Control Module (ECM) Calibration Code Update Document History Date 2021-12-10 Details Module Created Last Modified: 10-Dec-2021 https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2021/tsb210272.html 2/2