212322REV

Product Upgrade Bulletin 212322REV
UPGRADE
BULLETIN:
212322REV
YEAR(S)
AFFECTED:
2020, 2021,
2022
PRODUCT(S)
AFFECTED:
FLEETWOOD
BRAND:
BOUNDER
FLAIR
FORTIS
SOUTHWIND
HOLIDAY
RAMBLER
BRAND:
ADMIRAL
INVICTA
VACATIONER
MODEL(S)
AFFECTED:
ALL
SUBJECT:
Inspect and
if necessary,
enhance the
securing of lines/
hoses, cables or
wire harnesses
under motorhome
KEYWORDS:
Lines/hoses,
cables or wire
harnesses
ISSUE DATE:
December 2021
The purpose of this Product Upgrade Bulletin is to inform REV dealers of
the need to inspect and, if necessary, enhance the securing of lines/hoses,
cables or wire harnesses on certain model year 2020, 2021 and 2022
Fleetwood and Holiday Rambler brand Class A Gas motorhomes:
A list of potential affected vehicle serial numbers appears at the end of this
Upgrade Bulletin.
CONDITION:
On motorhomes affected by this Product Upgrade, there may be the
potential of lines/hoses, cables and or wire harnesses not be adequately
secured.
Dealers are required to obtain Prior Authorization using the
A.D.N. warranty portal. Dealers must also call REV Dealer
Technical Support before beginning any work and after the
unit is in the repair bay. You will receive instructions and
any other necessary information.
• READ THIS ENTIRE BULLETIN CAREFULLY BEFORE PROCEEDING AND
FOLLOW ALL SAFETY PRECAUTIONS.
• Review the list of affected units at the end of this bulletin to ensure the
motorhome you are inspecting is part of this campaign.
• Take a copy of this bulletin with you when servicing the unit.
• If there are any questions after reviewing the entire procedure, contact
REV Dealer Technical Support. (800) 816-9825
• KEEP CLEAR OF ALL PINCH POINTS WHEN WORKING UNDER
A MOTORHOME.
• THE LEVELING JACKS SHOULD NOT SUPPORT ANY WEIGHT OF
THE MOTORHOME WHILE WORK IS PERFORMED.
• DO NOT WORK UNDER AN ELEVATED MOTORHOME UNLESS IT
IS SUPPORTED BY A LIFT OR WITH JACK STANDS CAPABLE OF
SUPPORTING ITS WEIGHT.
CAUTION
• ENGINE EXHAUST COMONENTS MAY BE HOT. ALLOW THE UNIT TO
SIT AND COOL BEFORE BEGINNING UNDER UNIT INSPECTION/
REPAIR
• HEED ALL PRECAUTIONS AND USE APPROPRIATE PERSONAL
PROTECTIVE EQUIPMENT TO AVOID INJURY.
© 2021 REV Recreation Group Inc.
This bulletin is supplied for technical information only and is not an authorization for repairs.
“It is impossible to know, evaluate and advise the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Accordingly, anyone
who uses a service procedure or tool must first assure that neither personal safety nor vehicle safety will be jeopardized by the selected service methods.”
Product Upgrade Bulletin 212322REV UPGRADE
December 2021
page 1 of 33
INSPECTION AND REPAIR:
1. Park the motorhome on dry, level paved surface. Place the transmission into PARK
and set the parking brake. Turn off the ignition and remove the ignition key.
Maintain control of keys while work is performed.
2. Block wheels to prevent movement.
3. Use jack stands to support the unit while work is being performed.
CABLE AND HARNESS SECUREMENT
Step 1 Start by inspecting the underside of the unit, on a creeper or using a lift.
While under the unit visibly inspect from front to rear and side to side, along
the frame rails, looking for any lines/hoses, cables and or wire harnesses that
are looped, improperly routed or secured.
All lines/hoses, cables and or wire harnesses should already be secured with
insulated metal loop clamps and black nylon ties.
Step 2
If any lines/hoses, cables and or wire harnesses are looped, improperly routed
or secured use guidance from RVIA recommending clipping every 54 inches or
as needed as a point of general application. REV RV’s recommendation is
approximately 12 inches between points of securement in the engine
compartment area or near sources of heat.
Step 3
Use insulated metal loop clamps to attach to the bridge assembly with
self-tapping screws or threaded mechanical fasteners (must be a minimum
of 6” from heat sources or any moving components). If an insulated metal loop
clamp is needed, use the smallest size clamp that will properly fit around the
bundle lines/hoses, cables and or wires.
NOTE: If there are any irregularities to any lines/hoses, cables or harnesses,
take several clear photos and contact Dealer Technical Support at
(800) 816-9825 before proceeding.
This bulletin is supplied for technical information only and is not an authorization for repairs.
“It is impossible to know, evaluate and advise the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Accordingly, anyone
who uses a service procedure or tool must first assure that neither personal safety nor vehicle safety will be jeopardized by the selected service methods.”
Product Upgrade Bulletin 212322REV UPGRADE December 2021 page 2 of 33
PARTS
Nylon “Zip” Cable Ties (temp rated -45 to 185 degrees)
Metal Tek Screws
Insulated Metal Loop Clamps
TOOLS
Wheel Chalks
Creeper or Coach Lift
Trouble Light or Flashlight
Driver with Assorted Driver Bits
WARRANTY LABOR ALLOWANCE:
Product Upgrade #212322REV UPGRADE - Lines/hoses, cables & wire harness
securement
Use Flat Rate Code:
		
6306-11* Inspected/Not Defective
6306-12* Inspected/Defective/Repaired
0.3 hr.
0.5 hr.
* Prior Authorization and Photos Are Required
If you have any questions regarding this Bulletin, contact
Fleetwood and Holiday Rambler Technical Support: (800) 316-9825
Service literature can be accessed online at: http://revrvdealers.com
This bulletin is supplied for technical information only and is not an authorization for repairs.
“It is impossible to know, evaluate and advise the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Accordingly, anyone
who uses a service procedure or tool must first assure that neither personal safety nor vehicle safety will be jeopardized by the selected service methods.”
Product Upgrade Bulletin 212322REV UPGRADE
December 2021
page 3 of 33