LI5206E

LI5206E
INFORMATION LETTER
REFERENCE:
Nova Bus Manuals
SECTION:
16: Electrical System
RS NO:
MQR 7621-2385
APPLICATION DEADLINE:N/A
EFFECTIVE IN PROD.: LD08 (2021AU)
SUBJECT:
Stop Announcement System
JUSTIFICATION:
A faulty coupler could prevent reception of the GPS signal and result in no stop
announcements.
LEVEL
DIRECT CHARGES
DESCRIPTION
1
Replace the GPS antenna 90°coupler.
2
–
TIME
LABOUR
MATERIAL
Client
Client
45 min
–
–
–
MATERIAL REQUIRED PER VEHICLE
QTY
PART NO
REV.
DESCRIPTION
N102295
–
COUPLER 90° TNC CONNECTOR
–
–
–
LEVEL 1
1
LEVEL 2
–
To order, please contact the Nova Bus Customer Assistance Center:
For CANADA 1-800-771-6682 or [email protected]
For USA 1-877-999-8808 or [email protected].
Specify document number, quantity of parts required and shipping address.
DISPOSAL OF PARTS
REMOVED PARTS ARE:
DISCARDED
*
RETAINED
Yes
–
* Dispose of the unused parts and the defective parts in
accordance with local environmental standards in effect.
REVISION HISTORY
REV.
DATE
NR
2022JA13
APPROVED BY:
NQF772002 VERSION 3
CHANGE DESCRIPTION
Initial release
Jean-Nicolas Fournier
WRITTEN BY
Annie St-Jacques
Digitally signed by Jean-Nicolas Fournier
DN: cn=Jean-Nicolas Fournier, o=Nova Bus,
[email protected], c=CA
Date: 2022.01.14 10:10:21 -05'00'
PAGE 1 OF 5
INFORMATION LETTER
CLIENT
ORDER
ROAD NUMBER
LI5206E
VIN (2NVY/4RKY...)
FROM
TO
FROM
TO
9620
—
L82L4L9777581
L82L6L9777582
QTY
New York City Transit New York - NYCT
LC78
2
New York City Transit New York - NYCT
LD23
—
9621
L82LXL9777634
L82L5L9777668
3
New York City Transit New York - NYCT
LC79
9623
9784
L82L1M9777782
L82L4M9777954
162
New York City Transit New York - NYCT
LD06
8755
8758
L82J3L9777778
L82J3L9777781
4
New York City Transit New York - NYCT
LD64
9785
9894
L82L0M9777871
L82L0M9778132
126
PAGE 2 OF 5
NQF772002 VERSION 3
INFORMATION LETTER
LI5206E
WARNING
FOLLOW YOUR INTERNAL SAFETY PROCEDURES.
PROCEDURE
1.1.
Park the vehicle on a leveled surface and set the transmission shift selector to neutral (N). Apply the
parking brake.
1.2.
Set the master control switch to the eng stop position (o).
1.3.
In the battery compartment, set the battery disconnect switch to the disable position (OFF).
1.4.
Locate the GPS antenna (Figure 1).
GPS antenna
3-Lights panel
RF0 panel
GPS antenna location
Figure 1 - GPS Antenna Localisation
PAGE 3 OF 5
NQF772002 VERSION 3
INFORMATION LETTER
1.5.
LI5206E
Remove the 3-lights panel (Figure 2). Keep all parts and hardware.
a. Unscrew the 4 screws and remove the cover plate.
b. Unscrew the screws at the back of the 3-lights panel and the ones at the front. These are accessible
when the RFO panel is open.
c. Slowly lower the 3-lights panel and disconnect the three lights, the camera and the speaker. Put away
the 3-lights panel.
Camera
3 Lights
Remove screws
at the back
Remove screws
through the
RF0 panel
(not visible on
Figure)
Cover plate
Speaker
Figure 2 - 3-Lights Panel
GPS
Curb side
GPS
Street side
Figure 3 - GPS Connector
PAGE 4 OF 5
NQF772002 VERSION 3
INFORMATION LETTER
1.6.
Locate the GPS antenna connectors (Figure 3).
1.7.
Disconnect the GPS cable with its 90° coupler. Disconnect the 90° coupler and discard.
1.8.
Connect the new 90° coupler N102295 (Figure 4) to the GPS antenna connector.
LI5206E
Figure 4 - 90° Coupler N102295
1.9.
Reconnect the GPS cable.
1.10.
Reinstall the 3-lights panel.
a. Reconnect the speaker, the camera and the 3 lights.
b. Install all removed screws to mount the 3-lights panel.
c. Reinstall the cover plate.
1.11.
In the battery compartment, set the battery disconnect switch to the enable position (ON)
1.12.
The vehicle can return in service.
PAGE 5 OF 5
NQF772002 VERSION 3