S7626

Service Bulletin Details

Public Details for: S7626

Vds motor, failsafe mode not operable


- 2021 -

Models from 2021
2021 VOLVO VN
Service Campaign S7626
January, 2022
Volvo Dynamic Steering Motor Replacement
Service Category Service
Section Function Group 642
Market North America
Technician Skill Level A
Applicability
VOLVO
Years
2020
Models
VN
Introduction
On certain Volvo VN model trucks, the Volvo Dynamic Steering (VDS) motor may provide an
additional level of assist not expected by the operator. To meet Volvo stringent quality
standards the replacement of the VDS motor will be required. The removed VDS motor will need
to be shipped back to Volvo Reliability Engineering for evaluation.
Production Change Information
This bulletin applies to vehicles built within the specified production changes below.
Brand
Engine
Emission Level
Starting Build Date
Ending Build Date
EOBD-U20
13-March-2020
26-March-2020
Volvo
D13
Warranty Information
This repair is covered by an authorized Service Program. Reimbursement is
obtained through the normal claim handling process.
Claim Type (used only when uploading from the Dealer Bus. Sys.)
B
Main Labor Code
Description
6422-03-02-06
Steering Electric Motor, Replacement
Causal Part
SCC Authorization
Code
Expiration Date
Hours
23362567
S7626
December 31, 2022
2.7
Service Campaign S7626
January, 2022
Volvo Dynamic Steering Motor Replacement
Parts Information
Special Order Information if applicable
Part Numbers
Part Names
Quantity
23362567
VDS Motor
1
20924949
Bolt (steering shaft pinch bolt)
1
984396
Nut (steering shaft pinch lock nut)
1
Required Tools & Equipment
•
Premium Tech Tool (PTT) with latest version
•
Bendix ACOM Pro (Steering angle calibration)
Calibration Information
•
Be advised there are three major things that HAVE TO HAPPEN for successful calibration.
Front wheels straight ahead, VDS motor timing marks must be aligned, and the steering
wheel/steering angle sensor must be at 0 degrees. If these three things aren’t correct
the truck will not calibrate successfuly.
Return Shipment Instructions
•
Please pack the removed parts in the replacement part container. Print the yellow label
on page 3 and attach to the top of the container. See shipping destination on page 3.
Repair Procedure
1. Secure Vehicle for service.
2. Follow IMPACT operation ID 6422-03-02-06 for VDS motor replacement.
3. Release vehicle for service.
Volvo Trucks Reliability Engineering
HIGH PRIORITY, VDS Motor Replacement
Drop Area UC1-23
(Attn – Amy Lytle)
8003 Piedmont Triad Parkway
Greensboro, NC 27409
Phone: 339-346-4496


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.