A4822182065871_1
Service Bulletin Details
Public Details for: A4822182065871_1
The steering warning lamp may light up in the instrument cluster with a steering fault due to a software issue. This bulletin describes the steps to perform the update.
Models from 2022
Models from 2021
Models from 2020
Models from 2019
2019 AUDI A4 |
2019 AUDI A5 |
2019 AUDI A5 CABRIOLET |
2019 AUDI A6 |
2019 AUDI A7 |
2019 AUDI ALLROAD |
2019 AUDI Q5 |
2019 AUDI RS5 |
2019 AUDI S4 |
2019 AUDI S5 |
2019 AUDI S5 CABRIOLET |
2019 AUDI SQ5 |
Technical Service Bulletin 48 Active steering malfunction - DTC B200FF0 (symptom code 12288) 48 22 18 2065871/1 February 7, 2022. Model(s) Year VIN Range Vehicle-Specific Equipment RS5, and RS5 Cabriolet 2019 All Dynamic Steering A4, A4 allroad, S4, A5, A5 Cabriolet, A5 Sportback, S5, S5 Cabriolet, S5 Sportback, A6, A7, Q5, and SQ5 2019 – 2022 All Dynamic Steering A8 e quattro, and S8 2020 – 2021 All Dynamic Steering A6 allroad, S6, S7, and 2020 – 2022 Q5 e quattro All Dynamic Steering RS 5, RS 5 Sportback, RS 7, RS 6 Avant, Q5 Sportback, and SQ5 Sportback All Dynamic Steering 2021 – 2022 Condition Customer states: The steering warning lamp lights up in the instrument cluster with the following message: “Steering: fault. Adapt driving style. Turning circle larger” Workshop findings: DTC B200FF0 with symptom code 12288 is logged in the active steering control unit (diagnostic address 001B). Technical Background © 2022 Audi of America, Inc. Page 1 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Software issue. Production Solution Not applicable. Service Proceed according to the instructions below. 1. Delete the DTC in the active steering control unit (diagnostic address 001B). 2. Perform a short road test which includes a parking maneuver. 3. If the DTC does not return to the 001B control unit, return the vehicle to the customer. 4. If DTC returns, proceed with GFF and follow instructions described in the tester. Warranty Claim Type: 110 up to 48 Months/50,000 Miles G10 for CPO Covered vehicles – Verify Owner If the vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 4869 Damage Code: 0040 Diagnostic Time: GFF 0150 0000 Time stated on the diagnostic protocol (Max 50 TU) Road test prior to the service procedure 0121 0002 10 TU Road test after the service Procedure No allowance 0 TU Claim Comment: As per TSB 2065871/1 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. © 2022 Audi of America, Inc. Page 2 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Required Parts and Tools Not Applicable Additional Information All part and service references provided in this TSB (2065871) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2022 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. © 2022 Audi of America, Inc. Page 3 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.