SSM 50456

Service Bulletin Details

Public Details for: SSM 50456

Some 2021-2022 edge vehicles may exhibit various image issues such as infrared, distorted, glitching, flickering or fuzzy image in the rear view camera with dtc C1001 stored in the image processing module b or sync module and/or B115E store


- 2022 - 2021 -

Models from 2022
2022 FORD EDGE
Models from 2021
2021 FORD EDGE 
SSM 50456 - 2021-2022 Edge - Rear View Camera - Various Image Issues
With Diagnostic Trouble Codes (DTC) C1001 Stored In The IPMB Or APIM
And/Or B115E Stored In The BCM
Some 2021-2022 Edge vehicles may exhibit various image issues such as infrared, distorted,
glitching, flickering or fuzzy image in the rear view camera with DTC C1001 stored in the Image
Processing Module B or Sync module and/or B115E stored in the body control module (BCM). This
may be due to a poor circuit connection. Inspect both male and female sides of connectors C4357
and C2383A for loose, bent, or damaged terminals. Refer to Workshop Manual (WSM), Section 10000 General Information > Wire Terminal Inspection and Removal. If there is damage detected, refer
to cell 005 of the wiring diagram to perform the repair procedure. In addition to the wiring inspection,
make sure the IPMB and the APIM are in the latest software level. If there is no damage, continue
with the normal diagnosis.
APPLICABLE VEHICLES
2021 - 2022 CAR: DQ CD539N EDGE

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.