SSM 50497

Service Bulletin Details

Public Details for: SSM 50497

Some 2021 and 2022 mustang mach-e vehicles may exhibit a driver monitoring camera blocked message and/or diagnostic trouble codes (dtcs) B115E:97, B15E1:97, and/or B15E2:97 stored in the driver status monitor camera module (cmr). To correct


- 2022 - 2021 -

Models from 2022
2022 FORD MUSTANG MACH E
Models from 2021
2021 FORD MUSTANG MACH E 
SSM 50497 - 2021-2022 Mustang Mach-E - Driver Monitoring Camera
Blockage Message And/Or DTCs B115E:97, B15E1:97, B15E2:97
Some 2021 and 2022 Mustang Mach-E vehicles may exhibit a Driver Monitoring Camera Blocked
message and/or diagnostic trouble codes (DTCs) B115E:97, B15E1:97, and/or B15E2:97 stored in
the driver status monitor camera module (CMR). To correct the condition, place the steering wheel in
the center position so that the driver status monitor camera is visible. Connect the Ford Diagnosis
and Repair System (FDRS) and clear the DTCs. Turn the ignition off and wait 10 seconds. Turn the
ignition on and wait 1 minute. Using the FDRS, perform the CMR self-test to confirm the codes are
cleared.
APPLICABLE VEHICLES
2021 CAR: GW CX727N C-EV
2022 CAR: GW CX727N C-EV

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.