BS5165ER1

SAV.1E.2012MA
BS5165ER1
SERVICE BULLETIN
REFERENCE:
Nova Bus Manuals
SECTION:
14: Heating and Ventilation
RS NO:
MQR 7621-2265
APPLICATION DEADLINE: 2023JN13
CLAIM REFERENCE NUMBER: WB-5165
EFFECTIVE IN PROD.: N/A
SUBJECT:
Bracket installation to add a strain relief on the MCC display screen wires.
JUSTIFICATION:
MCC Driver's Display Electrical Terminal Failure.
LEVEL
1
DIRECT CHARGES
DESCRIPTION
New Bracket installation on upper driver panel
2
TIME
LABOUR
MATERIAL
Novabus
Novabus
0.5 hr
–
–
–
–
MATERIAL
QTY
PART NO
REV.
DESCRIPTION
REPLACES PART N°
1
N81344
–
CABLE TIE-EC21 VERT 50LBS 8"L
–
4
N32320
–
SCREW M3 X 20 MACH PAN CR SS
–
2
N25917
–
NUT LOCKNYL M3 ZC DIN 985
–
2
N80260
–
WASHER M3 SS BLK OX DIN125
–
1
N104152
–
BRACKET - MCC DISPLAY WIRES
–
–
–
–
–
–
–
–
–
LEVEL 1
LEVEL 2
–
SHOP SUPPLY
–
Materials will be available within 102 days once your order has been placed.
To order, please contact [email protected]
Or by phone for CANADA 1-800-771-6682, for USA 1-877-999-8808
Specify document number, quantity of parts required and shipping address.
DISPOSAL OF PARTS
REMOVED PARTS ARE:
DISCARDED *
RETAINED
Yes
–
* Dispose of the unused parts and the defective parts in
accordance with local environmental standards in effect.
REVISION HISTORY
REV.
DATE
CHANGE DESCRIPTION
WRITTEN BY
NR
2021SE23
Initial release
Rajendra N M
R1
2022JA20
Order LE11 added to the client list
Rajendra N M
APPROVED BY:
Jean-Nicolas Fournier
Digitally signed by Jean-Nicolas Fournier
DN: cn=Jean-Nicolas Fournier, o=Nova Bus,
[email protected], c=CA
Date: 2022.02.02 11:21:43 -05'00'
PAGE 1 OF 6
SERVICE BULLETIN
CLIENT
ORDER
Capital Area Transportation Authority Michigan CATA
ROAD NUMBER
SAV.1E.2012MA
BS5165ER1
VIN (2NVY/4RKY...)
QTY
FROM
TO
FROM
TO
LC07
6012
6015
S92J5K9777269
S92J5K9777272
4
Capital Area Transportation Authority Michigan CATA
LC08
700
718
L82J7K9777278
L82J8K9777306
19
Capital Area Transportation Authority Michigan CATA
LD34
719
730
L82J8L9777730
L82J2L9777741
12
Capital Area Transportation Authority Michigan CATA
LD35
6016
6018
S92J3L9777742
S92J7L9777744
3
Grand River Transit Ontario - GRT
LC52
21901
21912
L82J1K9777289
L82J3K9777309
12
Grand River Transit Ontario - GRT
LD19
22001
22031
L82J9L3752633
L82JXL3752723
31
Grand River Transit Ontario - GRT
LE11
22101
22104
L82L2M3753271
L82L8M3753274
4
Guelph Ontario
LC88
276
280
L82J8L3752378
L82JXL3752382
5
Guelph Ontario
LD33
281
284
L82J8L3752848
L82J8L3752851
4
Houston - Texas
LB63
2050
2050
L82K2J9776708
L82K2J9776708
1
Houston - Texas
LB72
2051
2069
L82K6J9776887
L82K4J9776905
19
Houston Texas - Metro
LC55
2070
2079
L82KXK9777378
L82K0K9777387
10
Houston Texas - Metro
LC91
2500
2501
L82J4L9777479
L82J0L9777480
2
Houston Texas - Metro
LC92
2502
2534
L82J8L9777601
L82J3L9777618
33
Moncton (Codiac) - New Brunswick
LB84
N/A
N/A
L82J3K9777004
L82J3K9777004
1
Moncton (Codiac) - New Brunswick
LD73
—
—
L82J1M3752918
L82J1M3752921
4
Timmins - Ontario Metrolinx
LD70
—
—
L82J2M3752913
L82J2M3752913
1
Timmins Ontario
LC02
—
—
L82JXK3751926
L82JXK3751926
1
PAGE 2 OF 6
SERVICE BULLETIN
SAV.1E.2012MA
BS5165ER1
WARNING
Follow your internal safety procedures.
PROCEDURE
1.1.
Park the vehicle on an even surface with transmission in neutral (N).
1.2.
Turn the ignition switch to OFF position and engage the parking brake.
1.3.
Set the master control switch in the STOP position (see figure 1).
Master control switch in
STOP position
Figure 1 - Master Control Switch in STOP Position
1.4.
Set the battery disconnect switch in the battery compartment to the OFF position (see figure 2).
Battery disconnect
switch in OFF
position
Main power light
turned OFF
Figure 2 - View of Battery Disconnect Switch
PAGE 3 OF 6
SERVICE BULLETIN
1.5.
SAV.1E.2012MA
BS5165ER1
Open the upper driver panel and locate the MCC display screen (see figures 3 & 4).
Figure 3 - MCC Screen Location
Figure 4 - MCC Screen Location.
PAGE 4 OF 6
SERVICE BULLETIN
1.6.
SAV.1E.2012MA
BS5165ER1
Remove the old M3 screws and replace them with new M3 screws P/N N32320 (see figure 5).
NOTE
Do not over tighten the screws to avoid cracking the plastic retaining the screen.
Figure 5 - MCC Screen Location.
1.7.
Install the bracket P/N N104152 using the M3 washer P/N N80260 and the M3 Locknyl nut P/N N25917
(see figure 6).
1.8.
Install the serrated cable tie P/N N81344 using the cable tie,secure the wires (see figure 6).
PAGE 5 OF 6
SERVICE BULLETIN
SAV.1E.2012MA
BS5165ER1
1) N80260 (M3 washer)
2) N25917 (Locknyl nut)
3) N104152 (Bracket)
4) N81344 (Cable tie)
Figure 6 - Bracket Installation
1.9.
Cut the excess cable tie and close the driver upper panel.
1.10.
Return the bus to service.
PAGE 6 OF 6