No. 117-18

Service
Technical Information
117/18 ENU
5745
5
Spare Parts Requirements - Inner Actuating Mechanism for Rear Door Opener:
Particular Points to Note (117/18)
Model Line:
Cayenne (92A)
Model Year:
As of 2011 up to 2018
Subject:
Rear door opener
Information:
Information
If the inner actuating mechanism for the rear door opener needs to be replaced, the new
component to be used from now on will (always, irrespective of requirements) have a switch for the
central locking system installed ( Removing switch for central locking system -item 2-).
The switch for the central locking system is not required when using the rear inner
actuating mechanism and must be replaced accordingly by a trim cover (958.555.247.02 left/958.555.248.02 - right), see  Workshop Manual '577819 Switch for central locking system'.
Removing switch for central locking system
Parts Info:
958.555.019.03 G0B  Inner actuating mechanism (left)
970.555.523.01 1E0  Trim cover (for inner actuating mechanism - left)
958.555.020.03 G0B  Inner actuating mechanism (right)
970.555.524.00 1E0  Trim cover (for inner actuating mechanism - right)
AfterSales
Feb 25, 2022
Page 1 of 2
5
Service
Invoicing:
Technical Information
ENU 117/18
5745
The work involved is invoiced under the labour operation:
I No.
APOS
Labor operation
57781900
Removing and installing switch for central locking
system
For invoicing and documentation using PQIS, enter the following coding:
Location (FES5)
57450
Door opener
Damage type (SA4)
1211
wrong part
References:
 Workshop Manual '577819 Switch for central locking system'
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2022 Porsche Cars North America, Inc.
Feb 25, 2022
Page 2 of 2
AfterSales