No. 136-18

Service
Technical Information
136/18 ENU
7054
7
Spare Parts Requirements - When Working on the Maintenance Flaps in the Rear
Doors: Replacing Covers on Maintenance Flaps (136/18)
Vehicle Type:
Macan (95B)
Model Year:
As of 2018 up to 2019
Subject:
Covers on maintenance flaps in the rear doors
Information:
Moisture can seep into the dry area of the vehicle.
•
•
Vehicles produced during the usage period may have been fitted with covers ( Tape on maintenance flap cover -1-) with excessive tolerances.
The affected covers can be identified by the tape ( Tape on maintenance flap cover -2-).
Information
•
The part number of the left/right cover has not changed, only the tolerance range was optimised.
The new left/right cover must be re-ordered accordingly.
When working on the maintenance flaps in the rear doors
•
•
on a vehicle that was produced during the usage period
and if there is tape
 replace the existing covers with re-ordered covers.
Tape on maintenance flap cover
AfterSales
Feb 25, 2022
Page 1 of 2
7
Service
Date of
Introduction:
Technical Information
ENU 136/18
7054
This affects vehicles produced in April and May 2018.
Covers with lower tolerances and without tape have been installed during production since 24 May 2018.
Parts Info:
Information
The following points must be observed in relation to the part numbers listed below and the
relevant vehicle (depending on equipment):
•
Part number indexes will increase over time. Before performing repairs, cross reference with
PET (Porsche Spare Parts Catalog), for newer parts (higher index).
•
PET must be checked to determine if additional components are needed.
Particular/modified components, whose part numbers are listed accordingly, are required for
the remedial action.
95B.839.315
 Cover (left)
•
95B.839.316
Invoicing:
 Cover (right)
For invoicing and documentation using PQIS, enter the following coding:
Location (FES5)
70540
Service tray
Damage type (SA4)
1614
Function not as specified
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2022 Porsche Cars North America, Inc.
Feb 25, 2022
Page 2 of 2
AfterSales