TSB-22-16-002

SUBJECT:
ENGINE CRANK / NO START IN
EXTREME COLD – DTC P062D
No:
TSB-22-16-002
DATE:
March 2022
MODEL:
2022 Outlander
CIRCULATE TO:
[ ] GENERAL MANAGER
[ X ] PARTS MANAGER
[ X ] TECHNICIAN
[ X ] SERVICE ADVISOR
[ X ] SERVICE MANAGER
[ X ] WARRANTY PROCESSOR
[ ] SALES MANAGER
PURPOSE
Customers may experience a crank/no start concern that is only exhibited in severe
freezing weather. The check engine light may illuminate, engine may not start and DTC P062D
will be present. Note: This TSB eliminates TIN-22-16-001.
Please replace 4 relays with anti-freezing ones for any affected vehicles that come in for service
(with customer approval) and any in dealer inventory.
AFFECTED VEHICLES
• 2022 Outlander in specific states:
o Idaho
o Iowa
o Maine
o Massachusetts
o Michigan
o Minnesota
o Montana
o New Hampshire
o North Dakota
o South Dakota
o Vermont
o Wisconsin
o Wyoming
• Vehicles built after March 3 and VIN JA4J3TA84NZ073063 have the 4 anti-freezing relays
installed
PROCEDURE
For vehicles exhibiting the symptoms above, please check for DTC P062D. Once
confirmed, please follow the procedure below to replace the anti-freezing relays.
Please contact your DPSM for any vehicles located outside of the affected states (listed
above) that are exhibiting DTC P062D and symptoms.
Copyright 2022, Mitsubishi Motors North America, Inc.
The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi
Dealer Link, MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com).
03/07/2022
Page 1 of 4
(5190)
PROCEDURE (Continued)
1. Turn the steering wheel fully to the left.
2. Remove the 4 clips (front side) and screw to remove the front wheel arch molding piece
as shown below.
3. Remove the 4 clips from the engine under cover and the 4 clips of the front splash shield.
4. Turn the splash shield upwards.
03/07/2022
Page 2 of 4
(5190)
5. Remove the two mounting bolts on the relay box bracket as shown below.
6. Remove the relay box cover.
7. Turn IG-OFF and replace the 4 relays indicated below (INJ, ST CUT, SR MTR x 2).
8. Reinstall all components and tighten the torque of the relay box bracket to: 5+1 N･m.
03/07/2022
Page 3 of 4
(5190)
PARTS
WARRANTY
This bulletin is supplied as technical information only and is not an authorization to repair. If
an affected vehicle is reported with the described condition, diagnose the condition, repair as
described in this bulletin and submit a normal warranty claim using the information below.
Warranty Coverage: 5/60 Basic Coverage (Canada: 5/100)
03/07/2022
Page 4 of 4
(5190)