2066511/1

Technical product information
Warnings within the DIP for the rear steering system - DTC P060700 evident within diagnostic address 00CB
Russische Föderation (5RU),Australia E04 Bentley rest Asia and Australia (6E04),China 796 VW Import Comp. Ltd (Vico), Beijing
(6796),Germany E02 Bentley rest Europe (6E02),Japan E03 Bentley Japan (6E03),Korea, (South) E08 Bentley South Korea
(6E08),United Arab Emirates E06 Bentley Middle East and Africa (6E06),United Kingdom E01 Bentley UK (6E01),United States
E05 Bentley USA and rest America (6E05)
Bentley
Topic
Market
area
Brand
Transaction
2066511/1
No.
Level
EH
Status
Approval
Release
date
Event memory entries
Diagnostic address
Event memory entry
Fault type Fault status
00CB - Rear axle steering P060700: Control Module Performance
static
New customer code
Object of complaint
Complaint type
Position
running gear -> adaptive suspension, pitch and roll compensation dimensional accuracy
running gear -> steering system
functionality
Vehicle data
New Flying and New Continental GT/C Speed vehicles only
Sales types
Type
3S31EB
3S31EB
3S41EB
3S41EB
ZG2*
ZG2*
ZG2*
MY
2021
2022
2021
2022
2020
2021
2022
Brand Designation Engine code
E
*
E
*
E
*
E
*
E
*
E
*
E
*
Equipment combinations
PR numbers
with V0D
Documents
Document name
master.xml
Gearbox code
*
*
*
*
*
*
*
Final drive code
*
*
*
*
*
*
*
Technical product information
Warnings within the DIP for the rear steering system - DTC P060700 evident within diagnostic address 00CB
Transaction No.: 2066511/1
Customer statement / workshop findings
Customer statement
•
Warnings within the DIP for the rear steering system (Figure 1)
Figure 1
Workshop findings:
•
DTC P060700 evident within diagnostic address 00CB - Rear Axle Steering control module
Technical background
In the event the issue is as described the operative should conduct the instructions within the Measure section of this TPI
Production change
-
Measure
1) Inspect the rear wheel steering control unit /J1019 (rear steering rack) for signs of the following:
•
Damage
•
Contamination
•
Excessive wear
2) Referring to the applicable wiring diagram, conduct an electrical integrity check for the rear wheel steering control unit /J1019 (rear steering
rack)
•
Refer to the applicable wiring diagram - Check earth point 710 for Cleanliness, security and integrity
•
If no faults were identified after conducting the wiring integrity checks - Refer to Rep.Gr 48 - Replace the rear wheel steering control unit
/J1019 (rear steering rack)
Within the rear axle steering rack procedure there are single use items which must be replaced and not reused. Ensure that new
replacements are available prior to starting this procedure - Refer to the ETKA parts catalogue
3) Refer to Rep.Gr 44 - Check and adjust the suspension and steering geometry
4) Once the wheel alignment has been carried out, where fitted the following "Bentley Safeguard" systems MUST be recalibrated:
•
Automatic cruise control
•
Night vision
•
Front camera for driver assist systems
•
Rear radar
•
Top view/rear view camera (Specification dependant)
•
Matrix headlights (Specification dependant)
5) Conduct a road test to confirm the issue is resolved
IMPORTANT: Failure to carry out these adjustments will lead to erratic operation of the driver assist systems
6) Raise a non technical DISS query confirming the instructions within this TPI have been conducted successfully and issue is now resolved after
replacing the rear wheel steering control unit /J1019 (rear steering rack)
Warranty accounting instructions
Warranty type - 110 or 910
Damage Service Number 48 41
Damage Code
00 40
New Flying Spur
Time to remove and refit the Rear wheel steering control unit (J1019)
Labour Operation Code 42 05 19 00
Time
900 TU
Time to remove and refit the Rear wheel steering control unit (J1019
Labour Operation Code 48 41 19 50
Time
20 TU
Time to conduct the applicable wiring integrity checks
Labour Operation Code 97 09 01 00
Time
Must not exceed 40 TU
New Continental GT Speed
Time to remove and refit the Rear wheel steering control unit (J1019)
Labour Operation Code 42 05 19 00 (Use 99 index until 14/04/22)
Time
1020 TU
Time to remove and refit the Rear wheel steering control unit (J1019)
Labour Operation Code 48 41 19 50
Time
20 TU
Time to conduct the applicable wiring integrity checks
Labour Operation Code 97 09 01 00
Time
Must not exceed 40 TU
New Continental GTC Speed
Time to remove and refit the Rear wheel steering control unit (J1019)
Labour Operation Code 42 05 19 00 (Use 99 index until 14/04/22)
Time
1050 TU
Time to remove and refit the Rear wheel steering control unit (J1019)
Labour Operation Code 48 41 19 50
Time
20 TU
Time to conduct the applicable wiring integrity checks
Labour Operation Code 97 09 01 00
Time
Must not exceed 40 TU
Refer to labour operation section within Elsa pro for the following:
•
Check and adjust the suspension and steering geometry
•
VIN applicable/specified "Bentley Safeguard" systems
Road test (all models)
Labour Operation Code 01 21 00 00
Time
50 TU
Parts information
Refer to the ETKA parts catalogue