TSB-22-16-001

Service Bulletin Details

Public Details for: TSB-22-16-001

This technical service bulletin was sent to dealers directing them upon customer complaint basis and after diagnosis, to replace the ignition coils of all cylinders with countermeasure parts when customers report a mil illumination and a lo


- 2022 - 2021 - 2020 - 2019 -

SUBJECT:
MIL ILLUMINATION WITH DTC P030X
AND LOSS OF POWER DUE TO FAIL SAFE MODE
No:
TSB-22-16-001
DATE:
March 2022
MODEL:
See Below
CIRCULATE TO:
[ ] GENERAL MANAGER
[ X ] PARTS MANAGER
[ X ] TECHNICIAN
[ X ] SERVICE ADVISOR
[ X ] SERVICE MANAGER
[ X ] WARRANTY PROCESSOR
[ ] SALES MANAGER
PURPOSE
Customers may advise of MIL illumination and a loss of engine power due to the vehicle
being in fail safe mode. Unstable idling due to poor contact of the ignition coil terminal and
DTC P030X may create the concern.
Upon customer complaint basis and after diagnosis, please replace the ignition coils of all
cylinders with countermeasure parts. Please follow the procedure below to identify the
countermeasure parts.
AFFECTED VEHICLES
•
•
•
•
2019 - 2022
2019 - 2020
2021 - 2022
2019 - 2022
Outlander Sport / RVR
Outlander
Outlander PHEV
Eclipse Cross
PROCEDURE
Verify that the parts being used for replacement are countermeasure parts. There are two
ways to verify:
Genuine parts identification:
1. The genuine part label for the countermeasure parts will have a total of 3 digits and
the third one will be a "T".
2. Please note that the countermeasure parts will have the "T" until March 2022.
3. After April 2022, the countermeasure parts will no longer have the "T" on the genuine
part label and will return to 2 digits.
Countermeasure Part
Old Part
Copyright 2022, Mitsubishi Motors North America, Inc.
The information contained in this bulletin is subject to change. For the latest version of this document, go to the
Mitsubishi Dealer Link, MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com).
03/07/2022
Page 1 of 2
(5143)
Lot number identification:
There are 6 digits of the lot number engraved on top of the ignition coil. The 4 digits from
the left indicate the production date. The 5th and 6th digit indicate the inspection
machine number. Countermeasure parts are produced after the following dates:
• Part 1832A083: 1Y10**(2021/Nov/10) or later
• Part 1832A080/1832A090: 1Y09**(2021/Nov/9) or later
PARTS
NOTE: Countermeasure part numbers have not changed.
WARRANTY
This bulletin is supplied as technical information only and is not an authorization to repair. If an
affected vehicle is reported with the described condition, diagnose the condition, repair as
described in this bulletin and submit a normal warranty claim using the information below.
Warranty Coverage: 5/60 Basic Coverage (Canada: 5/100)
03/07/2022
Page 2 of 2
(5143)


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.