T-SB-0029-22
Service Bulletin Details
Public Details for: T-SB-0029-22
Tsb: 2023 model year toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During
Models from 9999
9999 TOYOTA 4RUNNER |
9999 TOYOTA CAMRY |
9999 TOYOTA COROLLA |
9999 TOYOTA SIENNA |
9999 TOYOTA SUPRA |
9999 TOYOTA TACOMA |
9999 TOYOTA TOYOTA |
Models from 2023
T-SB-0029-22 March 29, 2022 Floor Mat Installation During PDS Service Category General Section Pre-Delivery Service Market USA Applicability YEAR(S) MODEL(S) 2023 4Runner, 86, bZ4X, Camry, Camry HV, Corolla, Corolla Cross, Corolla Hatchback, Corolla HV, Mirai, Sienna HV, Supra, Tacoma, Venza HV ADDITIONAL INFORMATION Introduction 2023 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle’s glove box for customer reference. CAUTION ALWAYS verify the floor mat is designed specifically for the model and model year it is being installed in. ONLY use floor mats that can be secured using the retainers. ALL OEM Toyota floor mats are specifically designed to fit correctly and be secured using the retainers. Make sure the floor mat is properly placed on the vehicle carpet and secured with the retainers. If the driver side floor mat is NOT properly placed and secured, it could slip and interfere with the movement of the pedals during driving and may cause an accident. Verify the operation of the accelerator, brake, and clutch (if equipped) pedals and clearance to the mat. NEVER install more than one floor mat at a time in the driver’s seating position. If applicable, ANY secondary set of floor mats (based upon customer preference, such as the all-weather floor mats or other floor mats) MUST be placed in the trunk with ALL the packaging material intact. Do NOT install the secondary mat on top of the primary floor mat already installed in the driver’s seating position. Page 1 of 5 T-SB-0029-22 March 29, 2022 Page 2 of 5 Floor Mat Installation During PDS Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty – – – – Installation Procedures Pre-Installed Knob Style .......................................................................................................... 2 Hook and Loop Style................................................................................................................ 5 Installation Procedure: Pre-Installed Knob Style NOTICE If the vehicle is equipped with two sets of floor mats (carpet and all weather): Do NOT install both sets of floor mats at the same time. Install one set according to the current season and store the other set in the luggage compartment. Discard the Floor Mat Safety Check insert for the installed set and keep the other with the spare floor mat set for the customer’s reference. 1. Verify that the driver, and if applicable, passenger side and rear seat floor mats are for the correct model and model year vehicle they are being installed in. T-SB-0029-22 March 29, 2022 Page 3 of 5 Floor Mat Installation During PDS Installation Procedure: Pre-Installed Knob Style (continued) 2. Align the floor mat grommets with the retention knobs and place the floor mat grommets onto the retention knobs. Figure 1. 1 2 3 3. Twist the retention knobs a quarter of a turn to lock in place. 1 Floor Mat Grommet 2 Retention Knob 3 Front of Vehicle Figure 2. 3 4. Verify the triangle marks on the retention knobs and floor mat are aligned. 1 1 Twist Knob 2 Knob in Locked Position 3 Align Triangle Marks 2 T-SB-0029-22 March 29, 2022 Floor Mat Installation During PDS Installation Procedure: Pre-Installed Knob Style (continued) 5. Verify proper installation. NOTE If applicable, do NOT remove the yellow caution tag from the floor mat. ONLY the customer should remove the caution tag. Figure 3. Page 4 of 5 T-SB-0029-22 March 29, 2022 Page 5 of 5 Floor Mat Installation During PDS Installation Procedure: Hook and Loop Style 1. Verify that the driver side, and if applicable, passenger side floor mats are for the correct model and model year vehicle they are being installed in. 2. Attach the driver, and if applicable, passenger side floor mats to the vehicle carpet using the hook and loop fasteners. Figure 4. 1 c 2 3 3. Verify proper installation. 1 Underside of Driver Floor Mat 2 Loop 3 Hook