37 13 02 2029027
Service Bulletin Details
Public Details for: 37 13 02 2029027
The dtcs are stored due to an issue with the transmission control module software. Specific dfccs are stored as a result of the following situations: ? Dtc P060A00 with dfcc 8692 can be logged when a driving mode (drive or reverse) is sele
Models from 2013
2013 AUDI A4 |
2013 AUDI A5 |
2013 AUDI A5 CABRIOLET |
2013 AUDI A6 |
2013 AUDI A7 |
2013 AUDI A8 |
2013 AUDI Q5 |
2013 AUDI S8 |
Models from 2012
2012 AUDI A4 |
2012 AUDI A5 |
2012 AUDI A5 CABRIOLET |
2012 AUDI A8 |
2012 AUDI Q5 |
2012 AUDI S8 |
Models from 2011
2011 AUDI A4 |
2011 AUDI A5 |
2011 AUDI A5 CABRIOLET |
2011 AUDI A8 |
2011 AUDI Q5 |
2011 AUDI S8 |
Technical Service Bulletin 37 Transmission warning message in cluster (DTC P060A00) 37 13 02 2029027/7 April 26, 2013. Supersedes Technical Service Bulletin Group 37 number 13-99 dated April 1, 2013 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A4,A5, A5 Cabriolet 2011-2013 All 8 speed 0BK Transmission Q5 2.0T 2011-2013 All 8 speed 0BK Transmission A6/A7 2013 All 8 speed 0BK Transmission A8, A8L, A8W12, S8 2011-2013 All 8 speed 0BK Transmission Condition REVISION HISTORY Revision Date Purpose 7 - Revised Service (Updated SVM table, ECM update added for A8 4.0T and S8) Revised Warranty (reflected changes in Service section) 6 4/1/2013 Revised Service (Updated SVM table) 5 12/19/2012 Revised Service (Updated SVM table) 4 9/27/2012 Revised Header data 3 7/11/2012 Revised Service (Updated SVM table) 2 6/28/2012 Revised Service (Changed wording) 1 3/15/2012 Original publication • Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction. • One of the following DTCs is stored in the transmission control module (TCM), J217 (02): • DTC P060A00 (Internal Control Module Monitoring Processor Performance) with DFCC 8692 • DTC P060A00 (Internal Control Module Monitoring Processor Performance) with DFCC 8694 • DTC P060A00 (Internal Control Module Monitoring Processor Performance) with DFCC 12480 Tip: If DFCCs do not match exactly, this TSB does not apply. © 2013 Audi of America, Inc. Page 1 of 5 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Technical Background The DTCs are stored due to an issue with the transmission control module software. Specific DFCCs are stored as a result of the following situations: • DTC P060A00 with DFCC 8692 can be logged when a driving mode (Drive or Reverse) is selected within one second of selecting Neutral, while the vehicle rolls at a speed less than 2 mph (such as when the vehicle is being maneuvered in or out of a parking spot). • DTC P060A00 with DFCC 8694 can be logged when the gear is quickly changed from Park to Neutral, due to a low diagnosis threshold. • DTC P060A00 with DFCC 12480 can be logged when the gear is changed using the Tiptronic function, due to a low diagnosis threshold. Production Solution • New software in the Transmission Control Module (TCM), J217 (02), addressed the condition. • For the A8 4.0T and S8 models, there is new software in Engine Control Module (ECM), J623 (01) that should be used in combination with new software in the Transmission Control Module, J217 (02), which addresses the condition. Service 1. Ensure that the DFCCs match exactly before proceeding. The DFCC is the 4-6 digit code in front of the P code, as pictured (Figure 1). Figure 1. Locating the 4-6 digit DFCC code. © 2013 Audi of America, Inc. Page 2 of 5 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin 2. Update the software using the SVM Update Instructions below. SVM Update Instructions 1. Follow all instructions in the attached TSB, 2011732 00 Software Version Management (SVM), operating instructions. 2. Update the TCM using the SVM action code as listed in the table below if necessary. 3. For A8 4.0T and S8 vehicles, update the ECM and the TCM, if necessary. The update may have already been performed in TSB 2033726. Model Engine and/or Transmission Old Software Part Number Old Software Version New Software Part New Number Software Version SVM Action Code (or higher) Transmission Software Update (except A8 4.0T and S8) A4, A5, A5 Cabriolet 2.0L with 8 speed Transmission A4, A5, A5 Cabriolet 2.0L with 8 speed Transmission Q5 2.0L with 8 speed Transmission Q5 Q5 8K0927158K All 8K0927158K 1014 02A048 All 8K0927158S 1007 02A048 8R0927158E All 8R0927158E 1015 02A048 2.0L with 8 speed Transmission 8R0927158T All 8R0927158T 1009 02A055 2.0L with 8 speed Transmission 8R0927158M All 8R0927158M 1008 02A048 All 4G0927158P 1006 02A055 4H1927158M 1007 4H1927158N 1007 4H1927158AD 4H1927158AD 1007 4H1927158AQ 4H1927158AQ 1004 8K0927158Q or 8K0927158S 4G0927158E or 4G0927158P A6, A7 A8, A8L 3.0L with 8 speed transmission 4.2L with 8 speed transmission © 2013 Audi of America, Inc. 4H1927158M 4H1927158N All 02A041 Page 3 of 5 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin A8L 6.3 W12 with 8 speed transmission 4H1927158T All 4H1927158T 1009 02A055 A8 4.0T and S8 Transmission and Engine Software Update Model Engine and/or Transmission Old Software Part Number Old Software Version New Software Part New Number Software Version SVM Action Code (or higher) A8, A8L S8 4.0T CEUA 4H0906014B 0002 4H0906014B 0003 8 speed transmission and Sport Diff 4H1927158CA All 4H1927158CA 1005 8 speed transmission 4H1927158BK All 4H1927158BK 1005 4.0T CGTA 4H0907557B 0003 4H0907557B 0004 8 speed transmission 44H1927158BL All 4H1927158BL 1005 01A134 4. Clear adaptations and perform test drive adaptation through GFF for 2011 model year. 5. Clear adaptations and perform standstill adaptation for 2012 or 2013 model year. © 2013 Audi of America, Inc. Page 4 of 5 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Warranty Claim Type: Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 3730 Damage Code: 0039 Labor Operations: Update TCM Software Update ECM and TCM Software (A8 4.0T/S8 only) Perform standstill adaptation 3730 2599 40 TU 2470 2599 60 TU 3735 5799 60 TU -ORPerform test drive adaptation Included in GFF below Diagnostic Time: GFF to perform test drive adaptation 0150 0000 Time stated on diagnostic protocol (Max 100 TU) Road test prior to service procedure No allowance 0 TU Road test after service procedure 2012 only. 0121 0004 10 TU Included in adaptation drive for 2011. Technical diagnosis at dealer’s discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) Claim Comment: As per TSB #2029027/7 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Additional Information The following Technical Service Bulletin will be necessary to complete this procedure: • TSB 2011732 00 Software Version Management (SVM), operating instructions. All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. © 2013 Audi of America, Inc. Page 5 of 5 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.