37 14 26 2025535

Technical Service Bulletin
37 Transmission faults stored (DTC P1703 or U1111)
37 14 26 2025535/2 May 15, 2014. Supersedes Technical Service Bulletin Group 37 number 11-20 dated May 13,
2011 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A4
2010-2012
All
0BK 8 speed Transmission
A5
2010-2012
All
0BK 8 speed Transmission
A5 Cabriolet
2010-2012
All
0BK 8 speed Transmission
Q5
2010-2012
All
0BK 8 speed Transmission
A8
2010-2012
All
0BK 8 speed Transmission
Condition
REVISION HISTORY
Revision
Date
Purpose
2
-
Revised header data (Added MY 2012 Vehicles, DTCs, and customer codes)
Revised title
Revised Service (Added TCM software update)
1
5/13/2011
Initial publication
• There is no customer complaint with this concern.
• The following DTCs may be stored:
• DTC P1703 (Limp home, control unit reset) in the transmission control module (TCM), J217 (address word
02).
• DTC U1111 (Function limitation due to missing message) in the selector lever sensor system control
module, J587 (address word 81).
Technical Background
If the memory is read with guided fault finding (GFF) or if Immobilizer test plans are performed, the above DTC
entries may be stored due to a communication error between the VAS tester and the TCM. (In particular, the issue
happens with tester VAS 5051B).
© 2014 Audi of America, Inc.
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Production Solution
New software in the TCM addressed the condition.
Service
Before proceeding, verify that the Condition and Technical Background match the issue. If other faults or
conditions exist, this TSB will not work and should not be followed.
SVM Update Instructions
1. Follow all instructions in TSB 2011732, 00 Software Version Management (SVM), operating instructions.
1. Update the TCM using the SVM action code as listed in the table below if necessary.
Model
A4 A5
allroad
New Software
Version
Old Software
Part Number
Old
Software
Version
New Software
Part Number
0BK
8K0927158K
0010
8K0927158K
0014
02A072
0BK
8K0927158Q
1004
8K0927158Q
1004
02A072
0BK
8K0927158S
1006
8K0927158S
1007
02A072
0BK
8K1927158
1004
8K1927158
1005
02A072
0BK
8R0927158T
1009
8R0927158T
1010
02A072
0BK
8R0927158E
1014
8R0927158E
1015
02A072
0BK
8R0927158M
1005
8R0927158M
1008
02A072
0BK
8R0927158AM
1002
8R0927158AM
1003
02A072
0BK
4H1927158M
1006
4H1927158M
1007
02A072
0BK
4H1927158N
1006
4H1927158N
1007
02A072
0BK
4H1927158AD
1006
4H1927158AD
1007
02A072
0BK
4H1927158AQ
1003
4H1927158AQ
1004
02A072
0BK
4H1927158AR
1006
4H1927158AR
1007
02A072
0BK
4H1927158BR
1003
4H1927158BR
1007
02A072
0BK
4H1927158T
1008
4H1927158T
1009
02A072
Transmission
(or higher)
SVM Code
Input
Q5
A8
© 2014 Audi of America, Inc.
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Warranty
Claim Type:
Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin
is informational only.
Service Number:
3730
Damage Code:
0041
Labor Operations:
Connect battery charger and update TCM software
3730 2599
40 TU
Diagnostic Time:
GFF
No allowance
0 TU
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
No allowance
0 TU
Technical diagnosis at dealer’s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2025535/2
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
All parts and service references provided in this TSB (2025535) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
© 2014 Audi of America, Inc.
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.