TSB-22-42A-002
Service Bulletin Details
Public Details for: TSB-22-42A-002
This technical service bulletin was sent to dealers to provide an update to the keyless transmitter switch section, in the body section of the technical information manual and is part of the affected service manual.
Models from 2020
2020 MITSUBISHI ECLIPSE CROSS |
Models from 2019
2019 MITSUBISHI ECLIPSE CROSS |
Models from 2018
2018 MITSUBISHI ECLIPSE CROSS |
SUBJECT: CHANGE TO KEYLESS TRANSMITTER SWITCH - SERVICE MANUAL/TECHNICAL INFORMATION MANUAL REVISION No: TSB-22-42A-002 DATE: April 2022 MODEL: See below CIRCULATE TO: [ ] GENERAL MANAGER [ X ] PARTS MANAGER [ X ] TECHNICIAN [ X ] SERVICE ADVISOR [ X ] SERVICE MANAGER [ X ] WARRANTY PROCESSOR [ ] SALES MANAGER PURPOSE This TSB updates the Keyless Transmitter Switch section, in the Body section of the Technical Information Manual and is part of the affected Service Manual. AFFECTED VEHICLES • 2018 – 2020 Eclipse Cross AFFECTED SERVICE MANUAL • 2018 – 2020 Eclipse Cross Service Manual, Technical Information Manual, Group 42A-Body Copyright 2022, Mitsubishi Motors North America, Inc. The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi Dealer Link, MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com). 04/13/2022 Page 1 of 4 (5052) Please make the indicated changes to the 2018 - 2020 Eclipse Cross Service Manual, Technical Information Manual, Group 42A-Body -> Door and Liftgate. 42A-13 BODY DOOR AND LIFTGATE KEYLESS ENTRY SYSTEM M2420010001236Receiver antenna Attached sheet (3/3) Radio frequency signal Transmitter Electric signal Lock switch Door lock actuators (lock/unlock) Liftgate latch assembly Door mirror assembly (unfolding/folding) The signal causes the room light to extinguish when the doors are locked, or come on for 15 seconds when unlocked. The signal causes the hazard warning light to flash once when the doors are locked, or flash twice when unlocked (Initial setting). Unlock switch ACH03148AB The keyless entry system is installed. There are the x Using the LOCK/UNLOCK switches, all doors following features. (including liftgate) can be locked or unlocked. x Transmitter has two switches (LOCK/UNLOCK). x By using the lock/unlock switches, the driver can x The power door locks with selective unlocking lock/unlock all the doors (including liftgate), three switches (LOCK/UNLOCK/PANIC) has been adopted. fold/unfold the door mirrors. x The receiver antenna is equipped with the intex NOTE: Using a customization function, the opergral receiver and receiving antenna. ation of the door mirrors can be enabled or x Up to 8 encrypted codes (8 transmitters) can be dis-abled (Refer to P.42A-25). registered using scan tool (M.U.T.-IIISE). x Answer-back function has been adopted. 04/13/2022 Page 2 of 4 (5052) 42A-14 BODY DOOR AND LIFTGATE DESCRIPTION OF STRUCTURE AND OPERATION . TRANSMITTER x The transmitter is integrated into the master key. x When either switch is pressed, the transmitter emits a radio signal representing a specific ID code. x There are two switches on the transmitter; the lock switch and the unlock switch. x An indicator light, which illuminates when signals are transmitted, is added on the key grip. This indicator light informs you of the signal transmission status and warns you of flat battery. x A brilliant silver Three-diamond mark is installation on the back side of the key grip to improve appearance. x A signal transmission circuit (printed circuit) and a battery are housed in one case. The case is housed in the key grip, thus improving resistance to water ingress. x A coin type battery, CR1620 is used in the transmitter. x The transmitter switch operation allows the system to operate as follows: Attached sheet (3/3) Lock switch Unlock switch Three-diamond mark There are three switches on the transmitter; the lock switch, unlock switch and the panic switch (Refer to GROUP 54A - Panic alarm system ). ACH01468AB Function Transmitter operation System operation Standard function (lock/unlock) Press the lock switch once. All doors (including the liftgate) are locked. NOTE: . If the retracting function of the electric folding mirrors is added using a customization function, it can be retracted in synchronization with a lock operation. Press the unlock switch once. All doors (including the liftgate) are unlocked. NOTE: . If the opening function of the electrical folding mirrors is added as an adjustment function, it can be opened in synchronization with an unlock operation. Multi mode function Press the lock switch once to lock all doors The door mirrors are retracted. (including the liftgate), and within 30 seconds press the lock switch twice consecutively. Press the unlock switch once to unlock all The door mirrors return to the original doors (including the liftgate), and within 30 position. seconds press the unlock switch twice consecutively. Power door locks with selective unlocking 04/13/2022 Press the unlock switch once to unlock the driver’s door, and within 2 seconds, press the unlock switch again to unlock the front passenger’s door, rear doors and liftgate. Page 3 of 4 Power door locks with selective unlocking. NOTE: . Using a customization function, the power door locks with selective unlocking can be enabled or disabled. (5052) Lock switch Panic switch Unlock switch 04/13/2022 Page 4 of 4 (5052)