30 13 17 2032224

Service Bulletin Details

Public Details for: 30 13 17 2032224

Clutch pedal makes noises when pressed.


- 2013 - 2012 -

Technical Service Bulletin
30 Clutch pedal makes noises when pressed
30 13 17 2032224/2 January 8, 2013. Supersedes Technical Service Bulletin Group 30 number 12-16 dated
December 21, 2012 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
2012-13
All
Manual transmission
TT
A3
Condition
REVISION HISTORY
Revision
Date
Purpose
2
-
Revised Header data
1
Dec 21, 2012
Original
 Clicking or knocking noise when pressing the clutch pedal.
 Impulse noticeable when pressing the clutch pedal.
Technical Background
Excess clearance between mounting of clutch master cylinder and pedal assembly.
Production Solution
Not Applicable
Page 1 of 5
© 2013 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
Service
Replace mounting on clutch pedal and attach felt pieces on mounting to remove clearance.
1. Remove the mounting on the clutch pedal (Figure 3) according to the repair manual and
discard.
2. From part number: 533 867 910 A cut
two felt pieces 16mm long. (Figure 1)
Figure 1. Felt pieces.
3. On the short side cut into the felt pieces
to approximately half the length (Figure
2)
Figure 2. Cutting felt.
Page 2 of 5
© 2013 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
4. While holding the mounting (part
number: 1K0 721 357 A) closed (Figure
3), install felt strip onto both sides of
mounting.
Figure 3. Mounting held together before
installing felt.
5. Install the felt a distance of 7 mm from
tip on the depressed mounting on both
sides. (Figure 4).
Figure 4. Distance of felt installed from end.
Tip: Figure 4 shows the relaxed condition of the mounting.
6. Install the mounting on the clutch pedal according to the repair manual.
Page 3 of 5
© 2013 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
Warranty
Claim Type:
Use applicable claim type. If vehicle is outside any warranty, this Technical Service
Bulletin is informational only.
Service Number:
3005
Damage Code:
0020
Labor Operations:
Remove clutch pedal
3005 1900
See ELSA Web
for applicable
TUs.
Diagnostic Time:
Replace clutch pedal mounting and install felt
3005 5599
10 TU
GFF
No allowance
0 TU
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
0121 0004
10 TU
Technical diagnosis at dealer’ s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2032224/2
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Page 4 of 5
© 2013 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
Required Parts and Tools
Part number
Description
Quantity
533867910A
Felt strip
1
1K0721357A
Mounting
1
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with
your Parts Department and service manuals for the latest information.
Page 5 of 5
© 2013 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.