N682

5/25/22, 8:02 AM
Emissions Label
SERVICE ACTION
Subject:
Global Service Action
Number: N682
Publication No.: N682
Emissions Label
Model: Defender (LE)
Model Year: 2022
Date of Issue: 25 May 2022
To:
Jaguar Land Rover (JLR) North America, LLC - USA and Canada
For the
Attention
of:
The approved JLR retailer/authorized repairer
Related
NOTE: The information in this campaign is intended for use by trained, professional technicians with the
Information: knowledge, tools, and equipment required to do the job properly and safely. It informs these technicians of
conditions that may occur on some vehicles or provides information that could assist in proper vehicle
service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a JLR
retailer/authorized repairer, do not assume that a condition described affects your vehicle. Contact an
authorized JLR retailer/authorized repairer to determine if this campaign applies to a specific vehicle
This campaign has been issued to provide the relevant repair instructions, parts and warranty information.
This campaign is valid for two years only. Repairs must be completed prior to the expiry date at the top of
this campaign
DESCRIPTION OF DEFECT
A potential concern has been identified on specific vehicles within the above vehicle range.
On certain 2022 model year Land Rover Defender vehicles the emissions label states the incorrect evaporative emissions
classification for the vehicle.
ACTION TO BE TAKEN
At the next opportunity, you are requested to repair the vehicle.
Visit the British Brands Sales Suite (BBSS) website for a list of affected vehicles at your retailer/authorized repairer. Unsold vehicles
must be repaired prior to handover of the vehicle for retail sale.
Check the JLR claims submission system to make sure affected vehicles are correctly identified prior to starting this
campaign. The claims submission system will be updated to reflect only those vehicles affected.
At the time of confirming a booking for a vehicle repair, make sure that all outstanding campaigns are identified to make
sure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit.
Yours faithfully
Simon Barnes
Global Customer Service Quality Director
https://topix.landrover.jlrext.com/topix/content/document/view?id=1579205#G3190076!!4!1
1/2
5/25/22, 8:02 AM
https://topix.landrover.jlrext.com/topix/content/document/view?id=1579205#G3190076!!4!1
Emissions Label
2/2
5/25/22, 8:03 AM
Service instruction
SERVICE INSTRUCTION - N682
NOTE: The information in this campaign is intended for use by trained, professional technicians with the knowledge, tools, and equipment required to do the job properly and safely. It informs these
technicians of conditions that may occur on some vehicles or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a
Jaguar Land Rover retailer/authorized repairer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar Land Rover retailer/authorized repairer to determine if this
campaign applies to a specific vehicle.
Parts Information
The parts below should be ordered through Jaguar Land Rover (JLR) in the normal manner.
Description
Variant
Part Number Qty % Of Vehicles Requiring This Part*
Emissions label
110 - Ingenium I4 2.0L Petrol LR166311
1
21%
Emissions label
90 - Ingenium I4 2.0L Petrol
LR166312
1
5%
Emissions label
Ingenium I6 3.0L Petrol
LR166313
1
67%
Emissions label
V8 S/C 5.0L Petrol
LR147055
1
8%
* When ordering parts, order no more than the expected percentage failure rate of parts identified
SROs
Description
SRO
Time
Emissions label - Renew 05.10.10 0.1
Drive in/drive out
02.02.02 0.2
NOTE: Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to TOPIx to obtain the latest repair time.
Warranty Information
Warranty claims should be submitted quoting program code N682 with the relevant option code from the table below. As option codes are used there is no requirement for you to enter SROs or parts,
these are included for information only.
Program Code Option
Description
Variant
SRO
Time Part Number Qty
N682
A
Emissions label - Renew
110 - Ingenium I4 2.0L Petrol 05.10.10 0.1
LR166311
1
N682
B
Emissions label - Renew
Drive in/drive out
110 - Ingenium I4 2.0L Petrol 05.10.10 0.1
02.02.02 0.2
LR166311
1
N682
C
Emissions label - Renew
90 - Ingenium I4 2.0L Petrol
LR166312
1
05.10.10 0.1
https://topix.landrover.jlrext.com/topix/content/document/view?id=1579205#G3190077!!5!2
1/3
5/25/22, 8:03 AM
Service instruction
Program Code Option
Description
Variant
SRO
Time Part Number Qty
N682
D
Emissions label - Renew
Drive in/drive out
90 - Ingenium I4 2.0L Petrol
05.10.10 0.1
02.02.02 0.2
LR166312
1
N682
E
Emissions label - Renew
Ingenium I6 3.0L Petrol
05.10.10 0.1
LR166313
1
N682
F
Emissions label - Renew
Drive in/drive out
Ingenium I6 3.0L Petrol
05.10.10 0.1
02.02.02 0.2
LR166313
1
N682
G
Emissions label - Renew
V8 S/C 5.0L Petrol
05.10.10 0.1
LR147055
1
N682
H
Emissions label - Renew
Drive in/drive out
V8 S/C 5.0L Petrol
05.10.10 0.1
02.02.02 0.2
LR147055
1
NOTE: The option that contains the drive in/drive out allowance may only be claimed when the vehicle has been brought back into the workshop for this action alone to be undertaken.
Warranty claims should be submitted in accordance with the current JLR Global Warranty Manual, and its amendments, unless stated otherwise in this bulletin.
SERVICE INSTRUCTION
NOTES:
Some components shown removed for clarity.
Some variation in the illustrations may occur, but the essential information is always correct.
1. Open the hood.
https://topix.landrover.jlrext.com/topix/content/document/view?id=1579205#G3190077!!5!2
2/3
5/25/22, 8:03 AM
Service instruction
2. NOTES:
The new emissions label must be installed in the same position as the previous emissions label.
Apply a small amount of heat to the emissions label to aid the removal of the label.
Remove and discard the emissions label.
Clean the surrounding area.
Remove the adhesive backing from the new emissions label.
Install the new emissions label.
https://topix.landrover.jlrext.com/topix/content/document/view?id=1579205#G3190077!!5!2
3/3