NTB21-092A

Service Bulletin Details

Public Details for: NTB21-092A

Mil on with dtc P0404 stored in the ecm this bulletin has been amended. See amendment history on the last page. Please discard previous versions of this bulletin.


- 2021 -

Models from 2021
2021 NISSAN ROGUE
Classification:
Reference:
EC21-014A
Date:
NTB21-092A
April 12, 2022
MIL ON WITH DTC P0404 STORED IN THE ECM
This bulletin has been amended. See AMENDMENT HISTORY on the last page.
Please discard previous versions of this bulletin.
APPLIED VEHICLES:
APPLIED ENGINES:
2021 Rogue (T33)
PR25DD
IF YOU CONFIRM
The MIL is ON and DTC P0404 (EGR VOLUME CONTROL VALVE) is stored in the ECM,
AND
There are no drivability concerns.
ACTION
1.
Confirm the current ECM part number.
2.
Reprogram the ECM, if applicable.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it
contains information that is essential to successfully completing this repair.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/4
SERVICE PROCEDURE
1.
Using C-III plus, confirm the current ECM part number and write it on the repair order.

If it matches one of the part numbers in Table 1, continue to step 2 on page 3.

If it does not match one of the part numbers in Table 1, this bulletin does not
apply. Go back to ASIST for further diagnostic and repair information.
Table 1
MODEL
Rogue
YEAR
CURRENT ECM PART NUMBER: 23761-
2021
6RA2D, 6RA2E
6RA6B, 6RA6C
6RA7C, 6RA7D
6RA8C, 6RA8D
6RA9C, 6RA9D
6RG8A, 6RG9A
6RR0E
6RR1C, 6RR1D
6RR3E
6RR4C, 6RR4D
6RR6B, 6RR6C, 6RR6D, 6RR6E
6RR7A, 6RR7B, 6RR7C, 6RR7D, 6RR7E
6RR8A, 6RR8B, 6RR8C, 6RR8D, 6RR8E
6RR9B, 6RR9C, 6RR9D, 6RR9E
6RW0B, 6RW0C, 6RW0D, 6RW0E
6RW1B, 6RW1C, 6RW1D, 6RW1E
6RW2B, 6RW2C, 6RW2D, 6RW2E
6RW3B, 6RW3C, 6RW3D, 6RW3E
6RW6A, 6RW7A, 6RW8A, 6RW9A
2/4
NTB21-092A
Perform the following before starting the reprogramming procedure to prevent damage to the
control unit.







Connect the AC Adapter to the CONSULT PC.
Connect the CONSULT PC to the Internet via Wi-Fi or a network cable.
Ensure ASIST on the CONSULT PC has been synchronized (updated) to the
current date and all C-III plus software updates (if any) have been installed.
Turn OFF all external Bluetooth® devices (e.g., cell phones, printers, etc.) within
range of the CONSULT PC and the VI. If Bluetooth® signal waves are within range
of the CONSULT PC or VI during reprogramming, the reprogramming may be
interrupted.
Turn OFF all vehicle electrical loads.
Turn ON the hazard warning lamps.
Connect a battery maintainer or smart charger, set to reflash mode or a similar
setting, to ensure the battery voltage stays between 12.0 V and 15.5 V.
HINT:
 If you are not familiar with the reprogramming procedure, click here. This will link
you to the "CONSULT-III plus (C-III plus) ECM Reprogramming" general procedure.
 Take the vehicle for a 10 minute drive in order to meet the following Idle Air Volume
Learning conditions:
o Engine coolant temperature: 70 - 100°C (158 - 212°F)
o Battery voltage: More than 12.9 V (At idle)
o Transmission: Warmed up
 When reprogramming is complete, you will be required to perform Throttle Valve
Closed Position, Idle Air Volume Learning, Accelerator Closed Position and DTC
Erase.
2.
Reprogram the ECM.
3.
After completing Erase All DTCs, print a copy of the C-III plus screen showing the
before and after part numbers of the control unit and attach it to the repair order.
3/4
NTB21-092A
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Reprogram the ECM
(1)
DE97AA
ZE
32
(2)
(1) Reference the electronic parts catalog and use the ECM part number (23703-*****) as
the Primary Failed Part (PFP).
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time (FRT).
AMENDMENT HISTORY
PUBLISHED DATE
REFERENCE
September 30, 2021
NTB21-092
April 12, 2022
NTB21-092A
DESCRIPTION
Original bulletin published
Table 1 revised
4/4
NTB21-092A


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.