TTT068922
Service Bulletin Details
Public Details for: TTT068922
Tt: for 2022 tundra, the front coil spring rates are higher than the previous generation model. Special care must be taken when disassembling and reassembling the front spring and shock assemblies. Ensure the spring compressor being used ca
- 2022 -
Models from 2022
2022 TOYOTA TUNDRA |
Tech Tip T-TT-0689-22 March 14, 2022 Subject Market USA Coil Spring and Shock Servicing Service Category Section Suspension Front Suspension Applicability 2022 Tundra APPLICABLE VEHICLES 2022 Tundra CONDITION For 2022 Tundra, the front coil spring rates are higher than the previous generation model. Special care must be taken when disassembling and reassembling the front spring and shock assemblies. Ensure the spring compressor being used can meet or exceed the load capacities below. RECOMMENDATIONS 1.) When disassembling and reassembling the front strut assemblies, traditional coil spring compressors that attach at the spring coils must have a very high load rating. Most traditional spring compressors are not strong enough for the spring rates found on the 2022 Tundra. A Special Service Tool (SST) spring compressor is currently being developed. Until the SST becomes available, only use spring compressors that can withstand the spring rates found in the figures below. It is important to note that the necessary spring compressor capacity must be higher if compressing from the coils. Please reference the images below for spring compressor configuration and capacity requirements. When Compressing from Top/Bottom Minimum Capacity: 12,800 Nm Expires on Ver. 4.0 01/01/2022 T 03/14/2023 When Compressing from Mid-coil Minimum Capacity: 22,700 Nm © 2022, Toyota Motor Sales, USA Page 1 of 2 Tech Tip T-TT-0689-22 March 14, 2022 Subject Market Coil Spring and Shock Servicing USA Applicability RECOMMENDATIONS LINK REFERENCES This Tech Tip does not contain any link references Expires on Ver. 4.0 01/01/2022 T 03/14/2023 © 2022, Toyota Motor Sales, USA Page 2 of 2