No. 5-22

Installation and Conversion Instructions
Macan (95B)
5/22
ENU
9193
9
Apple CarPlay® Interface (9WT)
Information:
Retrofitting
Information
Figure 1
Model Year:
As of 2022
Notices:
After enabling the Apple CarPlay interface in the vehicle, iPhone® apps can also be used in the Porsche
Communication Management (PCM) of the vehicle.
The following requirements must be met in order to use this function:
•
•
At least iPhone 5 or a newer device with iOS 7.1 or later software
Availability of Apple CarPlay
You will find information about the available regions at https://support.apple.com.
Part Info:
95B.044.900.07
Tool:
9900 - PIWIS Tester 3
Coding:
1
 License key for Apple CarPlay
Coding/Programming Apple CarPlay
1.1
Preparatory work – Coding
Tequipment
Jun 8, 2022
Page 1 of 4
9
Macan (95B)
9193
ENU
5/22
1.1.1
Installation and Conversion Instructions
Connecting a battery charger.  Workshop Manual '270689 Charging vehicle
electrical system battery'
NOTICE
Voltage drop
•
Risk of irreparable damage to control unit
•
Risk of damage to control unit
•
Fault entries in the control unit
•
Coding in the control unit is aborted
•
Malfunctions in control unit, even during programming

Switch off the ignition and remove the ignition key before disconnecting the control
unit.

Ensure that the power supply is not interrupted during programming.

Connect a battery charger with a current rating of at least Nominal value 90 A to the
vehicle battery.
NOTICE
Control unit programming will be aborted if the Internet connection is unstable.
•
An unstable Internet connection can interrupt communication between PIWIS Tester
III and the vehicle communication module (VCI). As a result, control unit programming
may be aborted.

During control unit programming, always connect PIWIS Tester III to the vehicle
communication module (VCI) via the USB cable.
1.1.2
9900 - PIWIS Tester 3 must be connected to the vehicle and switched on.
1.1.3
Switch on ignition AND hazard warning lights on the vehicle.
Information
The 9900 - PIWIS Tester III instructions take precedence since the description
may be different with later Tester releases.
The procedure described here has been structured in general terms; different text
or additions may appear on the 9900 - PIWIS Tester III.
Jun 8, 2022
Page 2 of 4
1.1.4
Select the "Diagnostics" PIWIS Tester menu item.
1.1.5
If 9900 - PIWIS Tester 3 is connected correctly, a connection to the vehicle will be
established: The model line is detected: "Macan" model line is detected.
1.1.6
Create a vehicle analysis log (VAL) in the "Overview" menu item.
Tequipment
Installation and Conversion Instructions
Macan (95B)
5/22
ENU
9193
9
Information
The function is ONLY available when the Tester is online!
1.2
Enabling Apple CarPlay
1.2.1
Select the "Function enable" function. Press •F12“ to continue.
1.2.2
Enter user name. Tap the password input field and enter the password. Select
"Login".
1.2.3
Select the "Enable" function. Press •F12“ to continue.
1.2.4
Touch the licence number input field and enter the licence number.
Press •F12“ to continue.
1.2.5
Confirm the "Apple CarPlay" function by pressing •F12“.
Wait until "Functions have been enabled successfully." appears.
1.2.6
Press •F12“ to go to the "Overview" menu.
Select the "Display enabled functions" function. Press •F12“ to continue.
Wait until a table containing the enabled functions appears, e.g.:
Control unit
Function
PCM4 (001)
Apple CarPlay
Status
Voice control
Sport Chrono
Bluetooth
Navigation
UAS (universal audio interface)
1.2.7
Press •F12“ to continue.
Press •F11“ to return to the Overview menu.
1.3
Code/program the new vehicle equipment(s)
1.3.1
Press •F11“ to return to the list of control units.
Select all control units by pressing •Ctrl A“. Press •F12“ to continue.
1.3.2
Switch to the "Codings/adaptations" menu. Press •F12“ to continue.
Select "Automatic coding" in the menu. Press •F12“ to continue.
1.3.3
Wait until the message "Coding has been completed successfully" appears. Press
•F12“ to continue.
Switch to the "Overview" menu.
Tequipment
Jun 8, 2022
Page 3 of 4
9
Macan (95B)
9193
ENU
2
91 93 23 40:
Installation and Conversion Instructions
5/22
Concluding work
2.1
Read out the fault memory of all systems, work through any existing faults, and erase the
fault memory.  Workshop Manual '033500 Fault memory for on-board diagnosis'
2.2
Switch off ignition and disconnect 9900 - PIWIS Tester 3.
2.3
Disconnect the battery charger.  Workshop Manual '2X00IN Battery trickle charge'
–Apple CarPlay interface enabled–
Labor time: 77 TU
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2022 Porsche Cars North America, Inc.
Jun 8, 2022
Page 4 of 4
Tequipment