15-246-19R

ATTENTION:
GENERAL MANAGER
q
PARTS MANAGER
q
CLAIMS PERSONNEL
q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
q
© 2019 Subaru of America, Inc. All rights reserved.
SERVICE INFORMATION BULLETIN
APPLICABILITY: 2020-22MY Legacy and Outback
		 2022MY Forester
		 2022MY BRZ
		 2022MY WRX
		
SUBJECT:
NUMBER: 15-246-19R
DATE: 08/15/19
REVISED: 06/30/22
New Immobilizer Registration Procedures
INTRODUCTION:
This Service Information Bulletin outlines a new required procedure to follow when performing
immobilizer-related repairs on the 2020-22 Legacy and Outback. To further enhance vehicle security,
this new procedure requires connection to a secure SBR server for authentication and to access
immobilizer information. An 8-digit “Authentication Key” supplied by SBR will be a required input
when working with SSM4. Unlike the previous system where Teaching Codes have been unchanged,
the new Authentication Key will change approximately every 6 months. This bulletin will be updated
with the latest Authentication Key as it becomes available. The new vehicles utilize an Immobilizer
Type “G” or “H” system depending on model:
•
G: Vehicles with a turn key ignition switch
•
H: Keyless Access with Push-Button Start.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
•
After connecting the SSM4 to the vehicle and starting the application, from the Main Menu,
select Immobilizer etc. registration, select the Vehicle then Immobilizer Type and Confirmed.
Continued...
Bulletin Number: 15-246-19R; Revised: 06/30/22
Page 1 of 3
G and H Types are new. (I-Type is for Canada-spec. only.)
•
When the vehicle utilizes either a G or H -Type system, an Authentication Key is required to
perform any of the immobilizer-related functions listed in the menu shown below.
•
Currently, for all other models, the immobilizer registration process is unchanged.
•
For 2020MY Legacy and Outback with a G or H -Type system, the Server Connection
screen shown below will be displayed. Input the current Authentication Key and select
“Connection”.
IMPORTANT NOTE: As of June 30th, 2022, the Authentication Key has been revised to
XFT7DWTH.
Continued...
Bulletin Number: 15-246-19R; Revised: 06/30/22
Page 2 of 3
XFT7DWTH
•
Detailed instructions for performing all immobilizer-related functions can now be found
on STIS under the Other/Miscellaneous Publication Type: “20MY Registration Manual for
Immobilizer” or by searching Document Code: S1108BE.
IMPORTANT REMINDERS:
•
SOA strongly discourages the printing and/or local storage of service information as
previously released information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
•
Always refer to STIS for the latest service information before performing any repairs.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Bulletin Number: 15-246-19R; Revised: 06/30/22
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard
for
excellence
in
Environmental
Management Systems. Please recycle
or dispose of automotive products in a
manner that is friendly to our environment
and in accordance with all local, state
and federal laws and regulations.
Page 3 of 3