22-SS-003H-1

GROUP
SUSPENSION
Technical Service Bulletin
SUBJECT:
DATE
JUNE, 2022
NUMBER
22-SS-003H-1
MODEL(S)
SANTA FE (TMA)
SANTA FE (TMA) 19” WHEEL REFINISHING SERVICE
THIS TSB HAS BEEN REVISED TO INCLUDE AN ADDITIONAL NOTE FOR WARRANTY SUBLET
UNDER THE WARRANTY INFORMATION TABLE.
Description: This bulletin describes the procedure to refinish 19” wheels equipped on some 19-20MY
Santa Fe (TMA) 2.0T vehicles with peeling clear coat.
Applicable Vehicles: Certain 2019-20MY Santa Fe (TMA) 2.0T vehicles equipped with 19” wheels
produced from June 26, 2018 to July 24, 2020.
Parts Information:
Part Name / Number
Wheel Assembly,
Aluminum
Image
Remarks
Refinish all 4 wheels.
52910-S1310
Valve Stem
52936-B2100
Replace the valve stems,
do not reuse.
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair
SUBJECT:
SANTA FE (TMA) 19” WHEEL REFINISHING SERVICE
Warranty Information:
Model
Op. Code
Operation
Op. Time
Causal Part
Nature
Cause
Santa Fe
(TMA)
52910FF1
Tire and Wheel Assy
(4 Wheels)
1.3 M/H
52910-S1310
A26
ZZ4
NOTE 1: Normal warranty applies.
NOTE 2: Use B2 sublet type which will carry the 5/60 warranty applicable to the wheels. Sublet
amount may require additional review.
NOTE 3: If a vehicle returns with the same issue after having been refinished and is still within the
warranty period, replace all 4 wheels.
NOTE 4: The op code includes time for tire disassembly, TPMS disassembly, TPMS reassembly and
programming, mounting the new tires, checking the RFV, wheel balancing, and TPMS sensor
registration.
Service Procedure:
1.
2.
Contact local wheel repair shops and
schedule wheel re-finishing service.
Remove wheel/tire assemblies from the
vehicle, remove the tires and TPMS
sensors.
NOTICE
Retain TPMS sensors and reinstall after wheels have been
refinished.
Deliver wheels to the repair shop for
refinishing service.
4.
Retrieve wheels, install TPMS sensors,
mount & balance tires:
• Use new valve stems, do not
reuse the original parts.
• Check RFV, arrange wheel/tire
assemblies according to the
graphic to the right.
• Register TPMS sensors to
module.
Front Left:
Front Right:
Lowest RFV
2nd lowest RFV
Rear Left:
Rear Right:
3rd lowest RFV
Highest RFV
Driver -Side
3.
Passenger -Side
Replace the TPMS valve stems.
Tightening Torque: 107.9-127.5 N.m
(11.0-13.0 kgf.m, 79.6-94.0 lb-ft)
5.
The service procedure is complete.
TSB #: 22-SS-003H-1
Page 2 of 2
SUBJECT: