PIE0661A
Service Bulletin Details
Public Details for: PIE0661A
Engineering information.
Models from 2022
2022 BUICK ENVISION |
Models from 2021
2021 BUICK ENVISION |
2021 CADILLAC ESCALADE |
2021 CHEVROLET SUBURBAN |
2021 CHEVROLET TAHOE |
2021 GMC YUKON XL |
Models from 2020
2020 CADILLAC CT4 |
2020 CADILLAC CT5 |
Subject: Engineering Information – Automatic Emergency Braking (AEB) Lamp On with No DIC Message Displayed and/or No DTCs Set Attention: Proceed with this EI ONLY if the customer has commented about this concern AND the PIE number is listed in the Global Warranty Management / Investigate History link (GWM/IVH). If the customer has not commented about this condition or the EI does not show in GWM/IVH, disregard the PIE and proceed with diagnostics found in published service information. THIS IS NOT A RECALL. Refer to the latest version of Service Bulletin 04-00-89-053 for more details on the use of Engineering Information bulletins. This EI has been revised to add the 2022 Model Year and include Escalade, Suburban, Tahoe and Yukon models. Please discard PIE0661. Brand: Model: Model Year: VIN: from to from to 2022 — — Buick Envision 2021 Cadillac CT4 2020 Engine: Transmission: — — CT5 Chevrolet Escalade Models 2021 Suburban Tahoe GMC Yukon Models Involved Region or Country North America Condition Important: If the customer did not bring their vehicle in for this concern, DO NOT proceed with this EI. Some customers may comment that the Automatic Emergency Braking (AEB) lamp is on with no message displayed on the driver information center (DIC). Technicians will find no DTCs set. Cause GM Engineering is attempting to determine the root cause of the above condition. Engineering has a need to gather information on vehicles PRIOR to repair that may exhibit this condition. As a result, this information will be used to "root cause" the customer's concern and develop/validate a field fix. Correction If you encounter a vehicle with the above concern, perform the following steps and contact the engineer listed below with your findings. 1. Set the following through Vehicle Settings -> Collision Detection System -> Pedestrian Collision Mitigation = Alert and Brake. 2. Take a photo of the Pedestrian Collision settings. 3. Take a photo of the Radio build information. This can be found under Radio Settings -> About -> Build Number -> press the information icon. Note: Shown in the picture above is the indicator lamp engineering is looking for. 1 4. If telltale is still illuminated, create a "Vehicle DTC and ID information" report under Vehicle Diagnostics in GDS2. 5. Under module diagnostics K124 Image Processing Control Module -> Data Display -> Front Impact Mitigation Disable History and open each event history 1-8 and follow PIP5632E to email the GDS2 session log, radio build number photo and radio settings photo to the engineer listed below. Contact Information The Contact Information has been redacted. Please include the following information if leaving a message: – Technician name – Dealer name and phone number – Complete VIN and repair order (R.O) number On the repair order, document the date and time the call was placed (even if the engineer was not reached). If engineering is unable to return the call within one hour, proceed with diagnosis and repair based on information found in SI. Warranty Information If engineer was contacted or required information was provided, use: Labor Operation Description Labor Time 3487418* Engineering Information - Automatic Emergency Braking (AEB) Lamp On with No DIC Message Displayed 0.3 hr *This is a unique Labor Operation for bulletin use only. Version 2 Modified Released October 08, 2021 February 10, 2022 – Added the 2022 Model Year and included Escalade, Suburban, Tahoe and Yukon models. 2