148020374721

Service Bulletin Details

Public Details for: 148020374721

Dtc P310B00 (dfcc 2638) can be caused by quantity deviations of the fuel pump.


- 2014 - 2013 -

Technical Service Bulletin
01 MIL on (and/or DTC P310B00 DFCC: 2638 stored in ECM)
01 14 80 2037472/1 June 20, 2014.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
S6, S7
2013 - 2014
All
4.0T CEUC
RS 7
2014
All
4.0T CRDB
Condition
• MIL on.
• DTC P310B00 (DFCC 2638) (Low fuel pressure regulation, fuel pressure outside specification) is stored in the
engine control module, J623 (address word 01).
Technical Background
DTC P310B00 (DFCC 2638) can be caused by quantity deviations of the fuel pump.
Production Solution
Not applicable.
© 2014 Audi of America, Inc.
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Service
Software update with SVM code 01A182.
SVM Update Instructions
Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
Update the ECM (J623) using the SVM action code as listed in the table below if necessary.
Model
Engine and/or
Transmission
Old Software
Part Number
Old Software
Version
New Software
Part Number
New Software
Version
S6 / S7
MY2013
4.0T CEUC
4G0906014B
All
4G0906014B
0008
S6 / S7
MY2014
4.0T CEUC
4G0906014E
All
4G0906014E
0004
RS 7
MY2014
4.0T CRDB
4G0906560B
All
4G0906560B
0005
SVM Action
Code
01A182
Warranty
Claim Type:
Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin
is informational only.
Service Number:
2470
Damage Code:
0039
Labor Operations: Check software level in ECM only (with no update needed)
Diagnostic Time:
2470 0199
Max 70 TU
Check software level in ECM and perform update
2470 2599
Max 110 TU
GFF
0150 0000
Included in
Labor
Operations
Road test after service procedure
0121 0004
10 TU
Technical diagnosis at dealer’s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2037472/1
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
© 2014 Audi of America, Inc.
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
• TSB 2011732, 00 Software Version Management (SVM), operating instructions
All parts and service references provided in this TSB (2037472) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
© 2014 Audi of America, Inc.
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.