M1557

M1557
2022-07-11
M1557: TOURING AND TRIKE REAR BRAKE SWITCH
Motorcycles Affected
Purpose for Service Bulletin
Table 1. Platforms
This bulletin informs dealers that Harley-Davidson has a mid
year change in how the Touring and Trike vehicles receive its
rear brake signal input.
Year
Platform
The Touring and Trike vehicles will now receive rear brake input
signal from a brake switch and will no longer activate the brake
light based on rear brake pressure in the Electro Hydraulic
Control Unit (EHCU).
Touring
2022 Electrical Diagnostic Manual (EDM) and Service Manual
will be updated with this change. See Service Information Portal
(SIP) for electronic version of manuals.
2022
Trike vehicles: Starting with Vehicle Identification Number
(VIN) 1HD1MAF13NB854022, will now be equipped with a rear
brake switch located at the rear master cylinder inlet line on
the EHCU. This includes the addition of two wires to the main
harness.
Police Touring
Trike
• BCM: [242B] terminal F3 to rear brake switch [121B-1]
terminal 1 (BE/GN).
CVO Touring
• [121B-2] terminal 1 to Ground (GND) (BK).
CVO Trike
Touring vehicles: Starting with VIN 1HD1KBC16NB645227,
the Body Control Module (BCM) will be calibrated to utilize the
factory install rear brake switch.
Model
FLHR
FLHRXS
FLHT
FLHTK
FLHX
FLHXS
FLHXST
FLTRK
FLTRX
FLTRXS
FLTRXST
FLHP
FLHTP
FLHTCUTG
FLRT
FLHXSE
FLTRKSE
FLTRXSE
FLHTCUTGSE
Markets Affected
All markets are affected.
Required Dealer Action
1726760
Table 2.
Action
Required
NO
YES
Resolution
Non-Actionable:
This is for informational purposes only or a technical tip.
Figure 1. Rear Brake Switch
NOTE
In the interest of preserving customer safety and satisfaction, always check for outstanding recalls whenever any motorcycle is brought into your dealership for either maintenance or service.
ROUTING
INITIAL HERE
SERVICE
MANAGER
SALES MANAGER PARTS MANAGER
WARRANTY
PROCESS
MANAGER
LEAD TECHNICIAN TECHNICIAN NO. 1 TECHNICIAN NO. 2 TECHNICIAN NO. 3 RETURN THIS TO