9003615

Service Bulletin Details

Public Details for: 9003615

Electronic shifter module (esm) if dtc's U1465, U1466, U1267 are present stored or active or if U114C is active, please replace the prndm and shifter with the following nik: 04670682ag shifter lower & one of the following prndm's which a


- 9999 -

Models from 9999
9999 RAM RAM 
9003615
03/01/2017
MY16, 17
WK
GPOP - Issue Review System
Part Number: 04670682A$, 68253107A$, 68253112A$, 68286830A$, 68286828A$
Part Description: Electronic Shifter Module (ESM)
Issue If DTC's U1465, U1466, U1267 are present Stored or Active OR if U114C is Active,
Description: please replace the PRNDM and Shifter with the following NIK:
04670682AG Shifter Lower & one of the following PRNDM's which applies;
68253107AC LHD BASE PRNDM
68253112AC RHD BASE PRNDM
68286830AD LHD SRT PRNDM
68286828AD RHD SRT PRNDM
Special Notes below from previous TechTip;
NOTE 1: If mismatch between shifter NIK and PRNDM occur, it may appear that the
PRNDM will not light up the first time the shifter is woken up via CAN. Please wait 2
minutes 15 seconds for the PRNDM lights to come back on. This is due to a
software update feature of the Shifter lower (04670682A$). During PRNDM software
update, the shifter will not be Functional.
NOTE 2: If Shifter is awake on CAN while disconnecting PRNDM from Shifter
(04670682A$), U114C-00 will activate.
NOTE 3: PRNDM supply Voltage from Shifter will be deactivated after 3 seconds if
PRNDM is disconnected from Shifter while Shifter is awake via CAN and U114C-00
will activate. Power to Shifter will have to be removed for approx.. 20 seconds after
PRNDM is connected to reset power to PRNDM from the Shifter. Power can be
reset by removing battery power or disconnecting the shifter main connector. This is
due to a safety feature built into the Shifter that will cut power to the PRNDM if a
communication error is observed between the Shifter and PRNDM.
NOTE 4: If Shifter is not responsive after Dead Battery condition, Charge Battery,
and once complete disconnect battery terminals for 30 seconds and reconnect.
Check Shifter functionality.
Please return parts back to FCA Engineering if PRNDM is deemed non-functional
after performing this TechTip. ~
~_____________________________________________~
Contact us at [email protected] for feedback related ONLY to this GPOP
Tech Tip. Please include the Part Number(s) and Tech Tip Part Description of the
Tech Tip you are referencing for our tracking system.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.