0500416REVA
Service Bulletin Details
Public Details for: 0500416REVA
Vibration while braking this bulletin involves resurfacing either front/rear or all rotors and if necessary, replacing either front/rear or all brake rotors due to inactivity on dealer lots. The customer may describe a shake and/or vibrat
Models from 2016
2016 CHRYSLER 300 |
2016 DODGE CHALLENGER |
2016 DODGE CHARGER |
Models from 2015
2015 CHRYSLER 300 |
2015 DODGE CHALLENGER |
2015 DODGE CHARGER |
NUMBER: GROUP: DATE: 05-004-16 REV. A Brakes September 28, 2016 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC. THIS BULLETIN SUPERSEDES SERVICE BULLETIN 05-004-16, DATED SEPTEMBER 24, 2016, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE ADDITION OF SALES CODE. THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE TRANSMITTAL (RRT) 16-091. ALL APPLICABLE UN-SOLD RRT VIN's HAVE BEEN LOADED. TO VERIFY THAT THIS RRT SERVICE ACTION IS APPLICABLE TO THE UN-SOLD VEHICLE, USE VIP OR PERFORM A VIN SEARCH IN TECHCONNECT. SUBJECT: Vibration While Braking OVERVIEW: This bulletin involves resurfacing either front/rear or all rotors and if necessary, replacing either front/rear or all brake rotors due to inactivity on dealer lots. MODELS: 2015 - 2016 (LA) Dodge Challenger 2015 - 2016 (LD) Dodge Charger 2015 - 2016 (LX) Chrysler 300 NOTE: This bulletin applies to vehicles within the following markets/countries: EMEA. NOTE: This bulletin applies to 15-16 MY vehicles from start of production to end of production **equipped with Anti-Lock 4-Wheel Disc Brakes (Sales Code BR3).** SYMPTOM/CONDITION: The customer may describe a shake and/or vibration in the steering wheel and/or the seat while the brakes are applied. This vibration may be caused by corrosion on the brake rotors. 05-004-16 REV. A -2- DIAGNOSIS: 1. Test drive the vehicle and apply the brakes to verify smooth braking application. Refer to the detailed service procedures available in DealerCONNECT> TechCONNECT under: Service Info>05 - Brakes/05 - Brakes, Base/Diagnosis and Testing>Diagnosis And Testing - Brake Rotor Lot Rot. 2. Does the vehicle pulsate while braking? a. YES>>> Proceed to Step #1 of repair procedure. b. NO>>>This Bulletin does not apply. Normal diagnosis should be performed. Use LOP (05-21-10-9V) to close the active RRT. NOTE: This repair must be performed at point of sale. Vehicle is to NOT be put back in storage after repair is done. If a customer’s VIN is listed in VIP or your RRT VIN list, and the brake induced vibration described above is experienced, perform the repair. For all other customers that describe the symptom/condition listed above, perform the Repair Procedure. PARTS REQUIRED: Qty. Part No. Description 2 (AR) 04779196AG Front Brake Rotor **Sales Code BR3** 2 (AR) 04779208AG Rear Brake Rotor **Sales Code BR3** REPAIR PROCEDURE: 1. Remove the wheels and inspect the rotors for proper specification and rotor runout. Refer to the detailed service procedures available in DealerCONNECT> TechCONNECT under: Service Info> 05 - Brakes/05 - Brakes, Base/Hydraulic/Mechanical/Rotor, Brake/Specifications and Refer to the detailed service procedures available in DealerCONNECT> TechCONNECT under: Service Info> 05 - Brakes/05 - Brakes, Base/Hydraulic/Mechanical/Rotor, Brake/Diagnosis and Testing>Rotor Runout. 2. Are the brake rotors out of specification and can NOT be resurfaced? a. YES>>> Proceed to Step #6. b. NO>>> Proceed to Step #3. 3. Resurface either the front/rear or all of the out of specification rotors. Refer to the detailed service procedures available in DealerCONNECT> TechCONNECT under: Service Info>05 - Brakes/05 - Brakes, Base/Hydraulic/Mechanical/Rotor, Brake/Standard Procedure> Brake Rotor Machining. NOTE: If on-car brake lathe is not available an off-car lathe is acceptable to use ONLY if the MLRO (mounted lateral runout) spec of .050 mm (0.0019 in.) max (with wheels mounted and torqued to spec) can be maintained. NOTE: If using an off-car lathe: • Install the wheels and torque to specifications. • Measure the lateral runout on the inboard side of resurfaced rotors. • A specification of .050 mm (0.0019 in.) max must be confirmed. If the spec can not be confirmed proceed to Step #6. -3- 05-004-16 REV. A 4. Install the wheels and test drive the vehicle to verify repair. 5. Repair is completed. 6. Replace either the front/rear or all of the brake rotors that are out of specification. Refer to the detailed service procedures available in DealerCONNECT> TechCONNECT under: Service Info> 05 - Brakes/05 - Brakes, Base/Hydraulic/Mechanical/Rotor, Brake/Removal/Installation. 7. Install the wheels and test drive the vehicle to verify repair. 8. Repair is completed. POLICY: Reimbursable within the provisions of the warranty. TIME ALLOWANCE: Labor Operation No: Description Skill Category Amount 05-21-10-9V Vehicle Test Drive (2 - Skilled) 4 - Chassis Systems 0.2 Hrs. 05-21-10-9W Inspect and Replace Front Disc Brake Rotors, Includes Vehicle Test Drive (2 - Skilled) 4 - Chassis Systems 0.8 Hrs. 05-21-10-9X Inspect and Replace Rear Disc Brake Rotors, Includes Vehicle Test Drive (2 - Skilled) 4 - Chassis Systems 0.8 Hrs. 05-21-10-9Y Inspect and Replace All Disc Brake Rotors, Includes Vehicle Test Drive (2 - Skilled) 4 - Chassis Systems 1.2 Hrs. 05-21-11-9D Inspect and Resurface Front Disc Brake Rotors, Includes Vehicle Test Drive (2 - Skilled) 4 - Chassis Systems 1.3 Hrs. 05-21-11-9E Inspect and Resurface Rear Disc Brake Rotors, Includes Vehicle Test Drive (2 - Skilled) 4 - Chassis Systems 1.3 Hrs. 05-21-11-9F Inspect and Resurface All Disc Brake Rotors, Includes Vehicle Test Drive (2 - Skilled) 4 - Chassis Systems 2.2 Hrs. FAILURE CODE: ZZ Service Action