00146320335762
Service Bulletin Details
Public Details for: 00146320335762
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, th
- 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 -
Models from 2016
2016 AUDI A3 |
2016 AUDI A3 ETRON |
2016 AUDI A3 SPORTBACK E-TRON |
2016 AUDI A4 |
2016 AUDI A5 |
2016 AUDI A5 CABRIOLET |
2016 AUDI A6 |
2016 AUDI A7 |
2016 AUDI A8 |
Models from 2015
2015 AUDI A3 |
2015 AUDI A3 ETRON |
2015 AUDI A4 |
2015 AUDI A5 |
2015 AUDI A5 CABRIOLET |
2015 AUDI A6 |
2015 AUDI A7 |
2015 AUDI A8 |
Models from 2014
2014 AUDI A3 |
2014 AUDI A3 ETRON |
2014 AUDI A4 |
2014 AUDI A5 |
2014 AUDI A5 CABRIOLET |
2014 AUDI A6 |
2014 AUDI A7 |
2014 AUDI A8 |
Models from 2013
2013 AUDI A3 |
2013 AUDI A3 ETRON |
2013 AUDI A4 |
2013 AUDI A5 |
2013 AUDI A5 CABRIOLET |
2013 AUDI A6 |
2013 AUDI A7 |
2013 AUDI A8 |
Models from 2012
2012 AUDI A3 |
2012 AUDI A3 ETRON |
2012 AUDI A4 |
2012 AUDI A5 |
2012 AUDI A5 CABRIOLET |
2012 AUDI A6 |
2012 AUDI A7 |
2012 AUDI A8 |
Models from 2011
2011 AUDI A3 |
2011 AUDI A3 ETRON |
2011 AUDI A4 |
2011 AUDI A5 |
2011 AUDI A5 CABRIOLET |
2011 AUDI A6 |
2011 AUDI A7 |
2011 AUDI A8 |
Models from 2010
2010 AUDI A3 |
2010 AUDI A3 ETRON |
2010 AUDI A4 |
2010 AUDI A5 |
2010 AUDI A5 CABRIOLET |
2010 AUDI A6 |
2010 AUDI A7 |
2010 AUDI A8 |
Models from 2009
2009 AUDI A3 |
2009 AUDI A3 ETRON |
2009 AUDI A4 |
2009 AUDI A4 CABRIOLET |
2009 AUDI A5 |
2009 AUDI A5 CABRIOLET |
2009 AUDI A6 |
2009 AUDI A7 |
2009 AUDI A8 |
Models from 2008
2008 AUDI A3 |
2008 AUDI A3 ETRON |
2008 AUDI A4 |
2008 AUDI A4 CABRIOLET |
2008 AUDI A5 |
2008 AUDI A5 CABRIOLET |
2008 AUDI A6 |
2008 AUDI A8 |
Technical Service Bulletin 00 Audi engine oil-filling procedure 00 14 63 2033576/2 May 28, 2014. Supersedes Technical Service Bulletin Group 00 number 13-49 dated May 14, 2013 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment All 2008 - 2016 All Not Applicable Condition REVISION HISTORY Revision Date Purpose 2 - Revised header data (Added model years) 1 5/14/2013 Initial publication Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. Technical Background When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage. Production Solution Not applicable. Service 1. Verify whether or not oil has entered either the intake manifold or the combustion chamber. 2. If oil is found in either of these areas, remove the oil. 3. Fill the engine with the correct amount of oil as listed the in the vehicle’s Fluid Capacity Table in ElsaWeb. When filling the engine with oil, use overhead oil dispensers, quart containers of oil, or oil-filling containers that do not completely seal the filler cap receptacle on the oil separator or valve cover. 4. Allow the oil to drain into the oil pan. 5. Check that the oil level is correct before starting the engine. © 2014 Audi of America, Inc. Page 1 of 2 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Warning: Do not use aftermarket speed-filling devices and funnels that have an airtight seal at the filler cap, as they are not approved. Damages caused by speed-filling devices and funnels that have an airtight seal at the filler cap are not warrantable and will not be reimbursed. Warranty This TSB is informational only and not applicable to any Audi warranty. Additional Information All parts and service references provided in this TSB (2033576) are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. © 2014 Audi of America, Inc. Page 2 of 2 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.