01137320332231

Technical Service Bulletin
01 Engine warning light on after engine replacement EA888 2.0 TFSI
01 13 73 2033223/1 March 7, 2013.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A3, TT
2008-2013
000000 - 999999
EA888 2.0 TFSI
A4, A5, A5 cab,
allroad, Q5, A6
2009-2013
000000 - 999999
EA888 2.0 TFSI
Condition
• The engine warning light is on after engine replacement.
• The engine is not running roughly. However, the engine control module, J623 (01), is storing one or more of the
following engine misfire fault codes: DTCs P0300 – P0304.
• The fault codes occur at light load, between 8% and 14% accelerator pedal position.
Technical Background
The programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
Production Solution
Not applicable.
Service
• Use Guided Fault Finding (GFF) to clear adaptations: GFF >> Powertrain >> “Engine Code”
>> OBD >> Engine Electronics, Functions >> Resetting Misfire Adaptations.
• If the program “Resetting Misfire Adaptations” is not available in GFF, delete the entry with
the VAS PC tester via the collective services. The entry must be deleted three times in a
row (within 28 seconds) to remove the programmed values.
Tip: Try to reproduce the condition so that it can be clearly assigned to this bulletin. The
model/type and engine code must match exactly. Otherwise, this solution will not work and
repeat repairs may necessary. In such cases, the warranty claim may be rejected.
© 2013 Audi of America, Inc.
Page 1 of 2
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Warranty
Claim Type:
Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin
is informational only.
Service Number:
2470
Damage Code:
0039
Labor Operations:
Program injection control unit
2470 2599
20 TU
Diagnostic Time:
GFF
No allowance
0 TU
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
No allowance
0 TU
Claim Comment:
As per TSB #2033223/1
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with
your Parts Department and service manuals for the latest information.
© 2013 Audi of America, Inc.
Page 2 of 2
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.