22-01-076H-1
Service Bulletin Details
Public Details for: 22-01-076H-1
Some 2021 ~ 2022my elantra (cn7, cn7a, cn7 hev) vehicles may exhibit a condition with multiple warning lights displayed on the instrument cluster and various symptoms; multiple dtcs (diagnostic trouble code), reduction in power steering ass
Models from 2022
2022 HYUNDAI ELANTRA |
2022 HYUNDAI ELANTRA HEV |
Models from 2021
2021 HYUNDAI ELANTRA |
2021 HYUNDAI ELANTRA HEV |
GROUP CAMPAIGN DATE Technical Service Bulletin SUBJECT: OCTOBER, 2022 NUMBER 22-01-076H-1 MODEL(S) Elantra (CN7, CN7a) Elantra Hybrid (CN7 HEV) ICU (INTEGRATED CENTRAL CONTROL UNIT) SOFTWARE UPDATE (SERVICE CAMPAIGN T8T) This TSB supersedes TSB# 22-01-076H to include ROM ID 4.01 for Elantra (CN7a). IMPORTANT Dealers must perform this service campaign on all affected vehicles prior to customer retail delivery and whenever an affected vehicle is in the shop for any maintenance or repair. Access the “Vehicle Information" screen (VIS) via WEBDCS to identify open campaigns. Description: Some 2021 ~ 2022MY Elantra (CN7, CN7a, CN7 HEV) vehicles may exhibit a condition with multiple warning lights displayed on the instrument cluster and various symptoms; multiple DTCs (Diagnostic Trouble Code), reduction in power steering assist, and not able to shift out of Park. Possible DTCs set are: • C181287 – CAN Time-out Gateway • C181208 – CAN Time-out Gateway • C180581 – LKAS CAN Signal Error • C181887 – CAN Time-out BCA • B109052 – TCU Missing Error This bulletin provides the service procedure to update the ICU (Integrated Central Control Unit) software to resolve the conditions stated above. Applicable Vehicles: Certain 2021MY Elantra (CN7) vehicles produced from 9/12/2020 – 6/01/2021*. Certain 2021~22MY Elantra (CN7a) vehicles produced from 9/25/2020 – 9/27/2021**. Certain 2021~22MY Elantra Hybrid (CN7 HEV) vehicles produced from 12/15/2020 – 8/11/2021*. *VIN starting with KMH **VIN starting with 5NP Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service Advisors, Technicians, Body Shop Manager, Fleet Repair SUBJECT: ICU (INTEGRATED CENTRAL CONTROL UNIT) SOFTWARE UPDATE (SERVICE CAMPAIGN T8T) Warranty Information: MODEL OP. CODE OPERATION OP. TIME Elantra/ Elantra Hybrid (CN7/CN7 HEV) 20D073R0 ICU Upgrade Elantra (CN7a) 20D073R1 ICU Upgrade CAUSAL PART NATURE CAUSE 0.3 M/H 91951-AA010 (CN7) 91950-BY110 (CN7 HEV) I14 ZZ3 0.3 M/H 91950-AB060 I14 ZZ3 Note 1: Submit claim on Campaign Claim Entry Screen Note 2: If a part that is not covered by this campaign is found in need of replacement while performing this campaign and the affected part is still under warranty, submit a separate claim using the same repair order. If the affected part is out of warranty, submit a Prior Approval request for goodwill consideration prior to performing the work. ICU SOFTWARE UPDATE PROCEDURE NOTICE Check if the vehicle’s software version is affected: • Check the current version of the ICU ROM ID and compare it to the ROM ID information table listed below before attempting to perform the software update. NOTICE You must initially perform the GDS ICU Update in Auto Mode. • Refer to the TSB 15-GI-001 for the tablet-based Mobile GDS ECU update procedures. • If the ICU update starts but then fails in Auto Mode, perform the update in Manual Mode to recover. Go to page 9 to complete the update in Manual Mode. NOTICE • In the ECU Upgrade screen, select ICU as the system to update. TSB #: 22-01-076H-1 Page 2 of 13 SUBJECT: ICU (INTEGRATED CENTRAL CONTROL UNIT) SOFTWARE UPDATE (SERVICE CAMPAIGN T8T) GDS INFORMATION: EVENT INFORMATION EVENT DESCRIPTION MODEL Elantra (CN7) "851.CN7 ICU LOGIC IMPROVEMENT" Elantra (CN7a) "852.CN7a ICU LOGIC IMPROVEMENT" Elantra Hybrid (CN7 HEV) "864.CN7 HEV ICU LOGIC IMPROVEMENT" ROM ID INFORMATION TABLE: MODEL SYSTEM Elantra (CN7) Elantra (CN7a) ICU P/N 91950-AA010 ~ 91950-AA990 91951-AA010 ~ 91951-AA590 ICU Elantra Hybrid (CN7 HEV) 91950-AB000 ~ 91950-AB060 91950-BY010 ~91950-BY240 OLD 1.02 1.03 1.04 1.05 4.01 4.02 4.03 3.03 3.04 3.05 3.06 ROM ID NEW 1.06 4.04 3.07 MANUAL MODE PASSWORD INFORMATION TABLE: Event # #851 – CN7 #852 – CN7a #864 – CN7 HEV MENU CN7 ICU 91950/91951-AAXXX CN7a ICU 91950 - ABXXX CN7 HEV ICU 91950-BY010~BY240 TSB #: 22-01-076H-1 PASSWORD 5051 5060 5019 Page 3 of 13 SUBJECT: ICU (INTEGRATED CENTRAL CONTROL UNIT) SOFTWARE UPDATE (SERVICE CAMPAIGN T8T) SERVICE PROCEDURE: ! CAUTION Cautions During Control Unit Upgrade • Confirm the vehicle's battery is above 12 volts. If the vehicle has been in storage for days, run the engine to assure an adequate battery charge state for reliable upgrade results. • Turn off all lamps (Do not leave head lamp switch in auto mode) and all accessories (heater, A/C, blower, radio, seat warmer, defroster, etc.); do not allow the battery to be discharged during upgrade. • Perform upgrade with the ignition switch in the ON position. • Be careful not to disconnect any cables connected to the vehicle or scan tool during upgrade. • Do not start the engine during upgrade. • Do not turn off the ignition switch during upgrade. • Do not touch the systems buttons (like ‘BACK’, ‘HOME’, ‘etc.’) while performing upgrade. ■ CONTROL UNIT UPGRADE PROCEDURE USING THE GDS-Mobile 1. GDS (Global Diagnostic System)-Mobile INSTALLATION PROCEDURE 1. Connect the VCI-II into the vehicle's DLC connector under the driver side instrument panel and check to turn the VCI-II on. Before starting the update, make certain that the battery of the Table PC is sufficiently charged. NOTICE ECU upgrade function on GDSMobile is basically operating in wireless communication and Wi-Fi direct. Also, it is possible to be performing via USB cable between Tablet PC and VCI-II. NOTICE You must initially perform GDS-M ICU Update in Auto Mode. If the ICU Update starts but then fails in Auto Mode, perform the update in Manual Mode to recover. TSB #: 22-01-076H-1 Page 4 of 13 SUBJECT: ICU (INTEGRATED CENTRAL CONTROL UNIT) SOFTWARE UPDATE (SERVICE CAMPAIGN T8T) 2. AUTOMATIC UPGRADE PROCEDURE USING THE GDS-MOBILE 2. Select ECU Upgrade on the initial screen after entering the vehicle information and select Auto Mode. 3. Select ICU system. TSB #: 22-01-076H-1 Page 5 of 13 SUBJECT: 4. ICU (INTEGRATED CENTRAL CONTROL UNIT) SOFTWARE UPDATE (SERVICE CAMPAIGN T8T) Select ID Check and GDS will read the current ROM ID in vehicle and check the newest upgrade event. NOTICE Check the current version of the ICU ROM ID and compare it to the ROM ID Information Table before attempting to perform the software update. 5. Select Upgrade after confirming correct Event is selected. CN7: 851.CN7 ICU LOGIC IMPROVEMENT CN7a: 852.CN7a ICU LOGIC IMPROVEMENT CN7 HEV: 864.CN7 HEV ICU LOGIC IMPROVEMENT 6. The vehicle battery voltage is checked to make sure it is at least 12 voltages to assure reliable upgrade results. Click OK if the results indicate voltage is ok. NOTICE If battery voltage is below 12 voltages as below, click BACK and then run the engine to assure an adequate battery charge state for reliable upgrade results. TSB #: 22-01-076H-1 Page 6 of 13 SUBJECT: 7. ICU (INTEGRATED CENTRAL CONTROL UNIT) SOFTWARE UPDATE (SERVICE CAMPAIGN T8T) Upgrade (1/2) will begin, and the progress of the upgrade will appear on the bar graph. Upgrade (1/2) will occur until 100% is reached on the bar graph. 8. Upgrade (2/2) will begin, and the progress of the upgrade will appear in the bar graph. Upgrade (2/2) will occur until 100% is reached on the bar graph. When upgrade reaches 100%, follow GDS instructions to “Turn IG off for 10 seconds and then back on. Click the OK button to continue.” TSB #: 22-01-076H-1 Page 7 of 13 SUBJECT: ICU (INTEGRATED CENTRAL CONTROL UNIT) SOFTWARE UPDATE (SERVICE CAMPAIGN T8T) 9. Click OK on the final screen, which indicates upgrade is complete. 10. After upgrade, remove power connector of indoor fuse box, and reconnect it after 5 seconds Check if any incidental Diagnostic Trouble Codes (DTC) have been created by the upgrade and clear the DTC(s) present. Start the engine to confirm proper operation of the vehicle. TSB #: 22-01-076H-1 Page 8 of 13 SUBJECT: ICU (INTEGRATED CENTRAL CONTROL UNIT) SOFTWARE UPDATE (SERVICE CAMPAIGN T8T) 3. MANUAL UPGRADE PROCEDURE USING THE GDS-MOBILE NOTE: • The manual upgrade should be performed only when the automatic upgrade fails. • If automatic upgrade fails, turn the ignition key off for about 10 seconds, place it back in the on position to reset the control unit before performing manual upgrade. 11. Select ECU Upgrade on the initial screen after entering the vehicle information and select Manual Mode. TSB #: 22-01-076H-1 Page 9 of 13 SUBJECT: ICU (INTEGRATED CENTRAL CONTROL UNIT) SOFTWARE UPDATE (SERVICE CAMPAIGN T8T) 12. Select ICU system. 13. Check that the newest event with reference to the above ROM ID Information Table is selected and tab Upgrade. CN7: 851.CN7 ICU LOGIC IMPROVEMENT CN7a: 852.CN7a ICU LOGIC IMPROVEMENT CN7 HEV: 864.CN7 HEV ICU LOGIC IMPROVEMENT 14. Enter the password from the below table then touch OK. #851 - CN7 MENU CN7 ICU 91950/51 -AAXXX #852 - CN7a CN7a ICU 91950 - ABXXX #864 - CN7 HEV MENU MENU CN7 HEV ICU 91950-BY010~BY240 TSB #: 22-01-076H-1 PASSWORD 5051 PASSWORD 5060 PASSWORD 5019 Page 10 of 13 SUBJECT: 15. ICU (INTEGRATED CENTRAL CONTROL UNIT) SOFTWARE UPDATE (SERVICE CAMPAIGN T8T) The vehicle battery voltage is checked to make sure it is at least 12 volts to ensure reliable upgrade results. Click OK if the results indicate voltage is OK. NOTICE If battery voltage is below 12 voltages as below, click BACK and then run the engine to assure an adequate battery charge state for reliable upgrade results. 16. Upgrade (1/2) will begin, and the progress of the upgrade will appear on the bar graph. Upgrade (1/2) will occur until 100% is reached on the bar graph. TSB #: 22-01-076H-1 Page 11 of 13 SUBJECT: 17. ICU (INTEGRATED CENTRAL CONTROL UNIT) SOFTWARE UPDATE (SERVICE CAMPAIGN T8T) Upgrade (2/2) will begin, and the progress of the upgrade will appear in the bar graph. Upgrade (2/2) will occur until 100% is reached on the bar graph. When upgrade reaches 100%, follow GDS instructions to “Turn IG off for 10 seconds and then back on. Click the OK button to continue.” 18. Click OK on the final screen, which indicates upgrade is complete. NOTICE Check the ICU ROM ID and compare it to the ROM ID Information Table to confirm latest ROM ID was updated. TSB #: 22-01-076H-1 Page 12 of 13 SUBJECT: 19. ICU (INTEGRATED CENTRAL CONTROL UNIT) SOFTWARE UPDATE (SERVICE CAMPAIGN T8T) After upgrade, remove power connector of indoor fuse box, and reconnect it after 5 seconds Check if any incidental Diagnostic Trouble Codes (DTC) have been created by the upgrade and clear the DTC(s) present. Start the engine to confirm proper operation of the vehicle. TSB #: 22-01-076H-1 Page 13 of 13