No. 17-22

Installation and Conversion Instructions
Macan (95B)
17/22
ENU
6699
6
Painted Exterior Package (PES)
Vehicle Type:
Macan / Macan T / Macan S
Model Year:
As of 2022
Restriction:
ONLY approved for vehicles with production date from calendar week 40 / 2021!
Reason:
Retrofitting
Information
Figure 1
Notices:
The Exterior package ( Figure 1) further emphasizes the sporty nature of the Macan. The Exterior
package comprises the following components:
•
•
•
•
•
Nose panel
New paint-ready door trim panels
New paint-ready rear spoiler
SportDesign side skirts
Front and rear apron
The components have been tested and approved in combination. Installing individual components is not
permitted or approved!
The above scope is also available from the factory for new vehicles by requesting optional equipment
Exterior package painted in exterior color and High-gloss Black (PES).
Tequipment
Oct 20, 2022
Page 1 of 11
6
Macan (95B)
6699
ENU
Installation and Conversion Instructions
17/22
For I-no. PES, we recommend the following paint finish:
•
•
High-gloss Black (041): Nose panel, door trim panels.
Exterior color: Roof spoiler, SportDesign side skirts, front and rear lower parts.
Information
The SportDesign exterior mirrors are not included in delivery! Please order the following separately
according to vehicle equipment.
Available part numbers can be found in the TEQUIPMENT catalogue or the Porsche Electronic Parts
Catalogue (PET).
Parts Info:
Vehicle WITHOUT camera (KA2) / camera and Surround View (KA6):
95B.044.870
 Exterior package, set –ECE / USA / RoW–
95B.044.870.B
 Exterior package, set –USA– Vehicle with trailer hitch
Vehicle WITH camera (KA2) / camera and Surround View (KA6):
95B.044.871
 Exterior package, set –ECE / USA / RoW–
95B.044.871.B
 Exterior package, set –USA– Vehicle with trailer hitch
Also order separately:
95B.898.056
1x
 Mounting parts for rear spoiler, set
Parts List:
Figure 2
Parts included for front ( Figure 2):
95B.827.555
Oct 20, 2022
Page 2 of 11
1x
Nose panel, prime-coated  Figure 2 -1-
Tequipment
Installation and Conversion Instructions
Macan (95B)
17/22
95B.805.903.D
1x
Front spoiler, prime-coated  Figure 2 -2-
PAF.038.501
4x
Expansion rivet A6.0 x 12.0  Figure 2 -3-
ENU
6699
6
Figure 3
Parts included for middle ( Figure 3):
95B.898.561.F
1x
Front left door trim panel, prime-coated  Figure 3 -1-
95B.898.565.E
1x
Rear left door trim panel, prime-coated  Figure 3 -2-
95B.854.883.A .G2X
1x
Left side skirt, prime-coated  Figure 3 -3-
95B.898.566.E
1x
Rear right door trim panel, prime-coated  Figure 3 -4-
95B.898.562.F
1x
Front right door trim panel, prime-coated  Figure 3 -5-
95B.854.884.A .G2X
1x
Right side skirt, prime-coated  Figure 3 -6-
95B.837.743
2x
Set of double-sided adhesive tape, (not shown)
Tequipment
Oct 20, 2022
Page 3 of 11
6
Macan (95B)
6699
ENU
Installation and Conversion Instructions
17/22
Figure 4
Parts included for rear ( Figure 4):
95B.827.934.D .G2X
1x
Rear spoiler, prime-coated  Figure 4 -1-
95B.807.834.AC.OK11
1x
95B.807.834.AD.OK11
1x
Rear skirt, Matt Black (1D0 / 1D7 / 1D8 / 6W1 / 6W2 / 6W3 / ECE
/ NAR)  Figure 4 -2Rear skirt, Matt Black (1D3, not shown)
95B.807.834.AE.OK11
1x
Rear skirt, Matt Black (1D6, not shown)
95B.807.580. .G2X1
1x
Rear panel, prime-coated (KA0)  Figure 4 -3-
95B.807.580.A .G2X1
1x
Rear panel, prime-coated (KA2 / KA6, not shown)
95B.807.811. .OK1
1x
Tailpipe cover, Matt Black  Figure 4 -4-
95B.807.812. .OK1
1x
Tailpipe cover, Matt Black  Figure 4 -5-
PAF.038.501
2x
Expansion rivet A6 x 12 (not shown)
1
Depending in respective set
Information
ONLY in the event of repairs/replacement:
Items WITHOUT a part number in the parts list can be found/ordered from the Porsche Electronic Parts
Catalog = PET.
Check model year and vehicle equipment (I-no.) in the standard catalog!
Materials:
Oct 20, 2022
Page 4 of 11
———
——
Micro-fiber cloth (commercially available)
———
——
Betaclean 3350 / isopropanol (commercially available)
Tequipment
Installation and Conversion Instructions
Macan (95B)
17/22
ENU
6699
6
9900 - PIWIS Tester 3
Tools:
Polyoxymethylene wedge (POM wedge, commercially available)
Soft-head hammer (commercially available)
Flashlight
Installation:
1
Preparatory work
CAUTION
Painting components
•
Risk of warping of components
•
Risk of damage to components

Observe the guidelines and instructions for painting components in the "Paint" Workshop
Manual.

Always place parts without tension on the painting devices provided during painting and drying
processes.
2
1.1
Paint all prime-coated parts as described in the paint recommendation (I-no. Paint PES) in
accordance with the Paint Manual.
1.2
Drive vehicle onto lifting platform.  Workshop Manual '4X00IN Lift vehicle'
1.3
Connect battery charger.  Workshop Manual '2X00IN Battery trickle charging'
1.4
Remove rear spoiler.  Workshop Manual '665819 Removing and installing rear spoiler'
Modifying front apron
2.1
Remove front apron.  Workshop Manual '631519 Removing and installing front apron'
2.2
Remove nose panel ( Figure 5). 
Workshop Manual '631619 Removing and
installing nose panel'
1
2
2.3
– Nose panel
– Front apron
Remove front spoiler.  Workshop Manual
'660319 Removing and installing front
spoiler'
Information
Check fixing clips. They must not be bent or
broken.
Figure 5
Make sure that all locking lugs have engaged correctly.
Tequipment
Oct 20, 2022
Page 5 of 11
6
Macan (95B)
6699
ENU
17/22
Installation and Conversion Instructions
Check that they are installed correctly.
2.4
Install new painted front spoiler on front apron and secure with expansion rivets A6.0 x 12.0
(4 x).  Workshop Manual '660319 Removing and installing front spoiler'
Inspect visible gap width all the way around and correct if necessary.
Information
Check fixing clips. They must not be bent or broken.
Make sure that all locking lugs have engaged correctly.
Check that they are installed correctly.
2.5
Install new painted nose panel on the front apron.  Workshop Manual '631619 Removing
and installing nose panel'
Inspect visible gap width all the way around and correct if necessary.
2.6
3
4
Oct 20, 2022
Page 6 of 11
Install front apron.  Workshop Manual '631519 Removing and installing front apron'
Modifying side skirts
3.1
Remove rear (left / right) door.  Workshop Manual '585119 Removing and installing rear
door'
3.2
Remove side skirts and install painted SportDesign side skirts.  Workshop Manual
'663119 Removing and installing entrance panel'
3.3
Install rear (left / right) door.  Workshop Manual '585119 Removing and installing rear
door'
Modifying door trim panels
4.1
Replace front door cover with new painted covers.  Workshop Manual '662219 Removing
and installing front door cover'
4.2
Replace rear door cover with new painted covers.  Workshop Manual '664219 Removing
and installing rear door cover'
5
ONLY for vehicles WITHOUT SportDesign exterior mirrors in Black (High-gloss = 6FJ)): Modify
exterior mirrors.  Workshop Manual '668937 Disassembling and assembling rear-view mirror'
6
Modifying rear apron
6.1
Remove rear apron.  Workshop Manual '635519 Removing and installing rear apron'
6.2
Remove rear skirt.  Workshop Manual '636819 Removing and installing rear skirt'
Tequipment
Installation and Conversion Instructions
Macan (95B)
17/22
ENU
6699
6
Information
Check fixing clips. They must not be bent or broken.
Make sure that all locking lugs have engaged correctly.
Check that they are installed correctly.
6.3
Install new painted rear panel on new rear skirt.  Workshop Manual '635619 Removing and
installing rear panel'
Inspect visible gap width all the way around and correct if necessary.
Information
Check fixing clips. They must not be bent or broken.
Make sure that all locking lugs have engaged correctly.
Check that they are installed correctly.
6.4
Install new rear skirt with installed rear panel in rear apron.  Workshop Manual '636819
Removing and installing rear skirt'
Inspect visible gap width all the way around and correct if necessary.
6.5
ONLY for vehicles with reversing camera (KA2 / KA6):
Modify reversing camera  Workshop Manual '914319 Removing and installing reversing
camera'
6.6
Install reversing light (left / right).  Workshop Manual '947419 Removing and installing
reversing lights'
Inspect visible gap width all the way around and correct if necessary.
7
6.7
Install number plate light.  Workshop Manual '942919 Removing and installing number
plate light'
6.8
Install new tailpipe cover trim frames (left / right) on the new rear skirt.  Workshop Manual
'637019 Removing and installing tailpipe cover trim frame'
6.9
Install rear apron. See  Workshop Manual '635519 Removing and installing rear apron'
Modify rear spoiler  Workshop Manual '665855 Replacing rear spoiler'
7.1
Remove additional brake light.  Workshop Manual '947019 Removing and installing
auxiliary brake lights'
7.2
Remove rear spoiler.  Workshop Manual '665819 Removing and installing rear spoiler'
7.3
Modify spray nozzle for rear window washer system and additional brake light.  Workshop
Manual '929419 Removing and installing rear window wiper system spray nozzle'
7.4
Install new rear spoiler.  Workshop Manual '665819 Removing and installing rear spoiler'
Tequipment
Oct 20, 2022
Page 7 of 11
6
Macan (95B)
6699
Coding:
ENU
8
Installation and Conversion Instructions
17/22
Enter Exterior package in exterior color and High-gloss Black (PES) in the vehicle data
8.1
Preparatory work – Coding
NOTICE
Voltage drop
•
Risk of irreparable damage to control unit
•
Risk of damage to control unit
•
Fault entries in the control unit
•
Coding in the control unit is aborted
•
Malfunctions in control unit, even during programming

Switch off the ignition and remove the ignition key before disconnecting the control unit.

Ensure that the power supply is not interrupted during programming.

Connect a battery charger with a current rating of at least Nominal value 90 A to the vehicle
battery.
NOTICE
Control unit programming will be aborted if the Internet connection is unstable.
•
An unstable Internet connection can interrupt communication between PIWIS Tester III and the
vehicle communication module (VCI). As a result, control unit programming may be aborted.

During control unit programming, always connect PIWIS Tester III to the vehicle communication module (VCI) via the USB cable.
8.1.1
Connect 9900 - PIWIS Tester 3 to the vehicle and switch on.
8.1.2
Switch on ignition AND hazard warning lights on the vehicle.
Information
The 9900 - PIWIS Tester III instructions take precedence since the description
may be different with later Tester releases.
The procedure described here has been structured in general terms; different text
or additions may appear on the 9900 - PIWIS Tester III.
8.2
Oct 20, 2022
Page 8 of 11
8.1.3
In the PIWIS Tester, select "Diagnostics" from menu.
8.1.4
If 9900 - PIWIS Tester 3 is connected correctly, a link to the vehicle will be established: "Macan model line" is detected.
Enter the vehicle equipment into the vehicle data
Tequipment
Installation and Conversion Instructions
8.2.1
Macan (95B)
17/22
ENU
6699
6
Press •F7“ in control unit overview to switch to “Additional menu”.
Question “Should a Vehicle Analysis Log (VAL) be created?” Press •F12“ to
confirm.
8.2.2
Select “Vehicle data maintenance”. Press •F12“ until “PR numbers” appears in
the Value group column.
8.2.3
Look for the options listed below in the “Family” column.
Check the value and select a new value from the drop-down menu if necessary.
8.3
Family
Value
Trim CD value
2D7 = rear end painted in exterior
color
Bumper
2JQ = nose in WF, nose panel in Black
Rear spoiler
5J2 = rear spoiler in vehicle color
Component with special surface /
contrast color
6FJ = exterior mirror base painted
Black
Design door covers (Attachments with
coated surfaces)
6H5 = door design trims in High-gloss
Black
Impact protection measures
VR4 = sill design (Sport Design
package)
8.2.4
Press •F12“ to continue. A table containing coding values (old and new values) is
displayed in the overview.
8.2.5
Press •F8“ to continue. Data is written / stored.
8.2.6
Wait for message “Creation of vehicle data has been completed” to be displayed.
Press •F12“ to go to Report management.
8.2.7
Press •F10“ to open log. Check that the selected vehicle equipment has been
entered and close log.
Code / program new vehicle equipment.
8.3.1
Select ALL control units (•CTRL+A“) in the control unit overview and switch to
“Coding / programming” column.
8.3.2
In coding mode, select "Automatic coding". Press •F12“ to continue.
8.3.3
Once “Automatic coding” is complete, “Coding successfully completed. Press
•F12“ to continue” appears in the header.
Switch to the control unit overview.
8.4
Read out error memories of all systems, remedy any existing errors and erase the error
memory.  Workshop Manual '0X03IN Diagnostics maintenance: Diagnostic system and
maintenance inter...'
Tequipment
Oct 20, 2022
Page 9 of 11
6
Macan (95B)
6699
ENU
17/22
Installation and Conversion Instructions
8.5
Switch off ignition and disconnect 9900 - PIWIS Tester 3.
8.6
Disconnect the battery charger.  Workshop Manual '2X00IN Battery trickle charging'
51 01 71 05:
–Body painting prepared–
Includes:
Order-related
Painting new parts, step 1
Plastic part
Labor time: 130 TU
66 99 61 51:
–Exterior package painted in exterior color and in High-gloss Black (1 x)
completely painted new part–
Includes:
Painting new parts, step 1:
Paint nose panel, front spoiler, door panels, side skirts, rear
panel and roof spoiler.
Materials: 26 MU
Labor time: 360 TU
66 99 23 10:
–Exterior package (painted) installed–
Includes:
Modify front apron;
Remove rear door (left / right), modify side skirts, install door,
rear (left / right), modify door trim panels;
Modify rear apron and roof spoiler;
Coding of exterior package scope, function test;
Read out error memory, remedy and erase errors.
Labor time: 815 TU
ONLY for vehicles WITHOUT SportDesign exterior mirrors in Black (High-gloss = 6FJ)):
66 89 37 11: Disassembling and assembling rear-view mirror
Labor time: 138 TU
66 89 37 12: Disassembling and assembling rear-view mirror
Labor time: 138 TU
66 79 61 51: Painting new rear-view mirror housing
Includes:
Upper part
Labor time: 20 TU
66 79 61 61: Painting new rear-view mirror housing
Includes:
Lower part
Labor time: 20 TU
66 79 61 71: Painting new rear-view mirror housing
Includes:
Mirror base
Labor time: 20 TU
ONLY for vehicles with Lane Change Assist / Lane Keep Assist (7Y2 / 7Y3 / 7Y7):
97 70 25 53: Program Lane Change Assist control unit;
Includes:
Measure calibration plate on the vehicle.
Oct 20, 2022
Page 10 of 11
Tequipment
Labor time: 47 TU
Installation and Conversion Instructions
Macan (95B)
17/22
ENU
6699
6
ONLY for vehicles with Surround View (8A4):
91 72 25 50: Program Surround View camera control unit
Labor time: 62 TU
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2022 Porsche Cars North America, Inc.
Tequipment
Oct 20, 2022
Page 11 of 11