SSM 51179

Service Bulletin Details

Public Details for: SSM 51179

Some 2021-2022 bronco vehicles may experience multiple warning indicators/messages displayed in the instrument panel cluster including but is not limited to pre-collision assist not available, hill start assist not available and/or front ca


- 2022 - 2021 -

Models from 2022
2022 FORD BRONCO
Models from 2021
2021 FORD BRONCO 
SSM 51179
2021-2022 Bronco – Multiple Warning Indicators/Messages In The IPC Multiple Communication Fault DTCs Related To The HS-CAN2
Some 2021-2022 Bronco vehicles may experience multiple warning indicators/messages displayed in the
instrument panel cluster including but is not limited to Pre-Collision Assist Not Available, Hill Start Assist
Not Available and/or Front Camera Malfunction. The vehicle may also have multiple communication fault
diagnostic trouble codes (DTC) setting in and/or related to the high speed control area network 2 (HSCAN2) modules. This may be due to a loose and/or improperly seated connector C210. If the vehicle
exhibits the above conditions, access and inspect connector C210 for proper attachment and/or damage
and repair as necessary. If this fault persists, refer to Workshop Manual, Section 418-00A and continue
with normal diagnostics. For claiming, use causal part 14290 and applicable labor operations in Section
10 of the Service Labor Time Standards (SLTS) Manual.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.