No. 199-22-3

Service
Technical Information
199/22 ENU
ANB4
9
ANB4 - Retrofitting Locking Caps on the Front Left and Right Headlights (Stop Delivery /
Recall Campaign)
Model Line:
Cayenne (92A)
Model Year:
As of 2011 up to 2018
Country /
Market:
USA (C02)
Canada (C36)
Concerns:
Locking caps on headlight
Information:
There is a possibility that a locking cap that prevents the adjustment of the headlights in the
horizontal direction was not installed during vehicle assembly on the affected vehicles.
If this is the case, certain legal requirements will not be met in the USA and Canada markets.
Action required: Check installation of the locking caps and retrofit a locking cap on the adjusting screw for the horizontal
adjustment on the left and right headlights if necessary.
Affected
Vehicles:
Only vehicles assigned to the campaign (see also PCSS Vehicle Information).
AfterSales
Nov 11, 2022
Page 1 of 4
9
Service
Technical Information
ENU 199/22
ANB4
Installation
Position:
Installation position of caps (e.g. Cayenne MY 2016)
1
– Cap (retrofit)
Required parts
Parts Info:
Required parts:
Part No.
Designation
– Location
Number
V04015001KC
 Plug
– Headlight adjusting screws
2 pieces
Checking caps and retrofitting them if necessary
Work Procedure: 1
Nov 11, 2022
Page 2 of 4
Open front lid.
AfterSales
Service
Technical Information
2
199/22 ENU
ANB4
9
Check whether a cap is installed on the adjusting
screw for the horizontal adjustment on the left and
right headlights.  Checking locking caps
Checking locking caps
Assessment
Action
( )
A locking cap is installed on the left and
right headlight.
End of remedial action.
Continue with Step 4.
(✗)
There is no locking cap or only one cap
installed on one headlight.
Retrofit locking cap.
Continue with Step 3.
3
Press locking cap on the left and right headlight into
the adjusting screw  Installing locking cap (e.g. left
headlight) -1- for horizontal adjustment.
4
Close front lid.
5
Enter the campaign in the Warranty and Maintenance
booklet.
Installing locking cap (e.g. left headlight)
Warranty processing
Scope 1 - 4:
Not relevant for this vehicle type.
AfterSales
Nov 11, 2022
Page 3 of 4
9
Service
ANB4
Scope 5:
Technical Information
ENU 199/22
Checking locking caps
Labor time:
Labor time: 12 TU
Checking locking caps
 Damage Code ANB4 099 000 1
Scope 6 - 13:
Not relevant for this vehicle type.
Scope 14:
Retrofitting locking caps
Labor time:
Retrofitting locking caps
Includes:
Checking locking caps
Labor time: 14 TU
Parts required:
V04015001KC
Plug
2 pieces
 Damage Code ANB4 099 000 1
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2022 Porsche Cars North America, Inc.
Nov 11, 2022
Page 4 of 4
AfterSales