No. 199-22-6

Service
Technical Information
199/22 ENU
ANB4
9
ANB4 - Retrofitting Locking Caps on the Front Left and Right Headlights (Stop Delivery /
Recall Campaign)
Model Line:
Panamera (971)
Model Year:
As of 2017 up to 2022
Country /
Market:
USA (C02)
Canada (C36)
Concerns:
Caps on headlight
Information:
There is a possibility that a locking cap that prevents the adjustment of the headlights in the
horizontal direction was not installed during vehicle assembly on the affected vehicles.
If this is the case, certain legal requirements will not be met in the USA and Canada markets.
Action required: Check installation of the caps and retrofit a cap on the adjusting screw for horizontal adjustment on the
left and right headlights if necessary.
Information
Every vehicle is exactly assigned just two campaign scopes.
 To find out which scope is assigned to the vehicle, see PCSS Vehicle Information.
Affected
Vehicles:
Only vehicles assigned to the campaign (see also PCSS Vehicle Information).
AfterSales
Nov 11, 2022
Page 1 of 6
9
Service
Technical Information
ENU 199/22
ANB4
Installation
Position:
Installation position of caps
1
– Cap (retrofit)
Required parts
Parts Info:
Required parts:
Part No.
Designation
– Location
Number
V04015001KB
 Plug
– Headlight adjusting screws
2 pieces
Required tools
Tool:
•
Torx screwdriver T7 (e.g. SGDET27ESD or AWCGT7 — locally available)
Checking caps and retrofitting them if necessary
Work Procedure: 1
Nov 11, 2022
Page 2 of 6
Open front lid.
AfterSales
Service
Technical Information
2
199/22 ENU
ANB4
9
Open the service flap  Opening service flap -3-.
Opening service flap
3
Check that a cap is installed on the adjusting
screw for the horizontal adjustment on the left and
right headlight.  Adjusting screw for horizontal
adjustment
Adjusting screw for horizontal adjustment
Assessment
Action
( )
A cap is installed on the left and right
headlight.
End of remedial action.
Continue with Step 4.
(✗)
There is no cap or only one cap installed on
one headlight.
Retrofit cap.
Continue with Step 3.
AfterSales
Nov 11, 2022
Page 3 of 6
9
Service
Technical Information
ENU 199/22
ANB4
4
Retrofitting caps.
4.1
Install cap on a Torx screwdriver TX 7.
 Installing cap
Installing cap
4.2
Press the cap onto the adjusting screw for
horizontal adjustment  Installing cap (e.g.
left headlight) -1- on the left and right headlights using the Torx screwdriver.
Installing cap (e.g. left headlight)
Nov 11, 2022
Page 4 of 6
AfterSales
Service
Technical Information
199/22 ENU
5
Close the service flap  Close the service flap -3-.
6
Close front lid.
7
Enter the campaign in the Warranty and Maintenance
booklet.
ANB4
9
Close the service flap
Warranty processing
Information
The specified labor time was determined specifically for carrying out this campaign and includes all
necessary preliminary work and rework.
The labor time may differ from the working times published in the Labor Operation List in the PCSS.
Scope 1:
Not relevant for this vehicle type.
Scope 2:
Checking caps
Labor time:
Labor time: 15 TU
Checking caps
 Damage Code ANB4 099 000 1
AfterSales
Nov 11, 2022
Page 5 of 6
9
Service
ANB4
Technical Information
ENU 199/22
Scope 3 - 10:
Not relevant for this vehicle type.
Scope 11:
Retrofitting caps
Labor time:
Labor time: 17 TU
Retrofitting caps
Includes:
Checking caps
Parts required:
V04015001KB
Plug
2 pieces
 Damage Code ANB4 099 000 1
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2022 Porsche Cars North America, Inc.
Nov 11, 2022
Page 6 of 6
AfterSales